15.4: Reflective LCD Cell Gap Measurement by QHQ Compensation Method
نویسندگان
چکیده
A phase compensation method is presented for measuring the cell gap of reflective LCD. We use the so-called QHQ compensator that is made up of two quarter-wave plates (Q) and one half-wave plate (H). This method is different from other compensation methods in that we can change both the orientation angle and retardation value of the compensator by rotating the quarterwave and halfwave retarders. As a result, the QHQ compensation method has a higher accuracy and a simpler procedure.
منابع مشابه
Wide-view and sunlight readable transflective liquid-crystal display for mobile applications.
A wide-view single cell gap transflective liquid-crystal display (TR-LCD) using the fringe field switching effect is proposed by incorporating a quarter-wave in-cell-retarder below the liquid-crystal (LC) cell in the reflective part. By optimizing the angle between the electrode stripes and the LC rubbing direction in the transmissive and the reflective regions, this TR-LCD exhibits a high opti...
متن کاملMeasurement of reflective liquid crystal displays
Cell gap thickness is one of the most important design parameters for liquid crystal displays ~LCD!. Existing measurement methods only apply to transmittive LC cells. These methods are obviously unsuitable for measuring the cell gaps of reflective LCDs with internal reflectors. This kind of LCD includes single polarizer reflective displays and liquid crystal on silicon displays. The objective o...
متن کاملP-156: Transflective Double Cell TN Liquid Crystal Display
Double cell Twisted Nematic (DTN) liquid crystal display is optimized for transflective liquid crystal displays, using MOUSE-LCD software. Two configurations of such DTN-LCD were simulated using a double and a single cell gap approach. DTN-LCD exhibits a high contrast ratio, wide viewing angles and achromatic (black/white) switching in both the transmissive mode and reflective mode. It also pos...
متن کاملP-157: A Single Cell-gap Transflective VA LCD using Positive Liquid Crystal Materials
We propose a single cell gap vertical-alignment transflective LCD with patterned electrodes using a positive dielectric anisotropic liquid crystal. As compared to prior attempts using a positive LC in VA configurations, our new design significantly reduces the threshold and on-state voltages to a range reachable by portable electronic displays. In addition, the light efficiency is also enhanced...
متن کاملPower generating reflective-type liquid crystal displays using a reflective polariser and a polymer solar cell
We herein report the results of a study of a power generating reflective-type liquid crystal display (LCD), composed of a 90° twisted nematic (TN) LC cell attached to the top of a light-absorbing polymer solar cell (PSC), i.e., a Solar-LCD. The PSC consisted of a polymer bulk-heterojunction photovoltaic (PV) layer of poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002