Mechanical Properties Between Ice and Various Materials Used in Hydraulic Structures : The Jin S . Chung Award Lecture , 2010
نویسندگان
چکیده
Ice has been a serious obstacle and problem for the construction of hydraulic and marine structures, lighthouses, and the like in cold regions. For these structures, ice forces are the major design criteria. Because the ice loads caused by sea ice on offshore structures have been fully reviewed a few times, they are purposely set aside in this paper. Instead, two major problems are discussed here in some detail: The adfreeze bond strength of sea ice and the abrasion by ice on hydraulic and marine structures. These discussions are mainly based on the results of the studies carried out by the author and various combinations of colleagues, postgraduate and graduate students under his Chairmanship for over 20 years; these groups are hereafter referred to as the SCS.
منابع مشابه
The Effect of Nanoclay on Damaged Areas of Composite and Nanocomposite Laminates
The influence of nanoclay on the impact damage resistance of glass fiber–epoxy composites has been investigated using high-velocity repeated ice impact tests. The incorporation of nanoclay into epoxy enhances the impact resistance of the composites. The impact of ice is a realistic scenario for composite structures such as aircraft fuselages, wing skins and fan blades and it is not a completely...
متن کاملMechanical Properties and Structures of Oil-well Cement Stone Reinforced with Siliceous Whisker
To fully utilize the siliceous whiskers and improve the mechanical properties of oil-well cement, the cement composites with different additions of siliceous whiskers were prepared, and analyzed by means of scanning electron microscopy (SEM), mechanical testing, X-ray diffraction (XRD), and infrared spectrum analysis. The results showed that the addition of 2% siliceous whiskers could slightly ...
متن کاملComparison of Compressive Properties Between Va-cuum Infusion and Hand Lay-Up Method Toward Bal-sa Core Sandwich Composites
The aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. Two types of sandwich composites with E-glass/Kevlar/polyester resin facings and End-grain balsa wood as core have been produced by vacuum infusion processing (VIP) and hand-lay up (HL) method. Compression tests on...
متن کاملModeling of Hygrothermal Damage of Composite Materials
Composite materials have been used extensively in various applications, such as mechanical engineering, aerospace engineering, and aviation thanks to their interesting mechanical properties. However, a substantial drawback in the use of such composite materials is that they absorb a significant amount of moisture when exposed to severe hygrothermal conditions. This factor dramatically affects t...
متن کاملLaboratory study of mechanical properties of ordinary concrete under high heat consumption in hydraulic structures, along with validation by SEM and XRD tests
In this laboratory research, a mixing plan was made of ordinary concrete containing Portland cement type 2 with a grade of 500 kg / m3. Compressive strength, tensile strength and modulus of elasticity tests of concrete were performed on concrete samples at 90 days of processing age at 21 °C and 600 ° C. In order to further evaluate and validate the results, SEM and XRD tests were performed on c...
متن کامل