Characterization of Polyaniline Based Polymer Light-emitting Devices during Operation by Electrical Impedance Spectroscopy
نویسندگان
چکیده
Polyaniline was used as hole injection material for polymer light emitting devices (PLED) spin coated from a water based polyaniline/polystyrenesulfonate (Pani/PSS) dispersion. Data presented here were based on red, yellow, green and blue light emitting polymers (LEP). Depending on the applied bias voltages the devices were studied by electrical impedance spectroscopy (EIS) in a wide frequency range. Experimental data could only be fitted by applying an equivalent circuit consisting of three RC elements in series. By separating the frequency dependent bulk and interface contributions, the bulk and junction resistance and capacitance were determined for various current densities. Variation in high interfacial capacitance was observed in the devices before and after stressing the PLEDs with a constant current of 10 mA/cm for 100 h.
منابع مشابه
Effect Of Molecular Structure On The Mechanical, Optical And Electrical Properties Of High Technology Fibers
The research efforts over the course of the last three years have led to the observance of a melt transition in the electroactive polymer polyaniline (PANI) in its base form which may facilitate some degree of melt processability. Structural characterization of films and fibers utilizing unique optical methods developed at Georgia Tech. has resulted in a new understanding of the relationship be...
متن کاملSynthesis and Characterization of Poly(o-toluidine) Doped with Camphor Sulphonic Acid
Among the conducting polymers, Polyaniline and its derivatives have been studied extensively in the last decade with improvements in processing having the key role in establishing the intrinsic electrical properties. In the present paper, the camphor sulphonic acid [CSA] doped Poly (o-toluidine) [POT] was prepared using chemical oxidative polymerization method. The prepared CSA doped POT was ch...
متن کاملStudy of impedance spectroscopy conducting polymer prepared with the use of water soluble support polymer
The intrinsically conducting polymer (ICP), polyaniline (PANI) is synthesized by chemical oxidative polymerization process with the help of water soluble support polymer poly-vinyl alcohol (PVA). The field dependence of the dielectric response is measured in the frequency range 50 Hz-1 MHz and temperature range 140-318 K. The frequency dependence of the imaginary impedance (Z′′) is found to obe...
متن کاملBiosensor for detection of selective anticancer drug gemcitabine based on polyaniline-gold nanocomposite
Electrochemical biosensor is an effective tool for pharmaceutical analysis due to its simplicity, specificity, sensitivity, fast, costeffective and repetitive measurements with miniaturized and portable devices. The paper illustrates the detail methodology for development of an amperometric biosensor based on polyaniline-gold nanocomposite film modified horseradish peroxidase for anticancer dru...
متن کاملStructural, Electrical, and impedance spectroscopy studies of Barium substituted nano calcium ferrites synthesized by solution combustion method.
Barium substituted nanocrystalline ferrites with chemical composition BaxCa1-xFe2O4 (x =0.0 to 0.25) BCAF were prepared by solution combustion method. The phase formation of mixed spinal structured ferrites was confirmed by PXRD analysis. The average crystallite size was calculated using Debye-Scherrer formula and it was found to be in the range of 27-44 nm. Surface morphology was analyzed by S...
متن کامل