The Torque Standard Machines in China
نویسندگان
چکیده
− This paper describes the development of torque standard machines in China, its measurement range and its measurement uncertainty information etc. Also, the situation of torque standard machines which are in building process or will be built in the future is described in this document. In 1970’s, the first standard machine for measuring torques was developed in Shanghai and it initiated the history of torque measurement in China. In the whole development process, there appeared four types of machines, which are: a) the rolling bearing type, b) the knife-edge type, c) the air-bearing type and d) the flexible supporting type. Nowadays, the torque standard machines in China are developing to the direction of large torque, superlarge torque, small torque and mini torque ranges, and they are stepping into the international level rank.
منابع مشابه
Analytical Modeling of Magnetic Field Distribution in Inner Rotor Brushless Magnet Segmented Surface Inset Permanent Magnet Machines
Brushless permanent magnet surface inset machines are interested in industrial applications due to their high efficiency and power density. Magnet segmentation is a common technique in order to mitigate cogging torque and electromagnetic torque components in these machines. An accurate computation of magnetic vector potential is necessary in order to compute cogging torque, electromagnetic torq...
متن کاملInvestigating Direct Torque Control of Six-Phase Induction Machines Under Open Phase Fault Conditions
This paper presents analysis and evaluation of classical direct torque control(DTC), for controlling a symmetrical six phase induction motor (SPIM) under open phasefault conditions. The machine has two three-phase windings spatially shifted by 60 electricaldegrees. The strategy of the proposed method consists of choosing the switching modesaccording to the configuration of living phases in such...
متن کاملInner Permanent Magnet Synchronous Machine Optimization for HEV Traction Drive Application in Order to Achieve Maximum Torque per Ampere
Recently, Inner permanent magnet (IPM) synchronous machines have been introduced as a possible traction motor in hybrid electric vehicle (HEV) and traction applications due to their unique merits. In order to achieve maximum torque per ampere (MTPA), optimization of the motor geometry parameters is necessary. This paper Presents a design method to achieve minimum volume, MTPA and minimum ...
متن کاملCogging Torque Reduction in PMSM Motor by Using Proposed New Auxiliary Winding
Performing fast and accurate methods for modeling the electrical machines has been the subject of several studies and many authors proposed different procedures to attain this aim. Beside the accuracy, the speed of the method is of great concern. On the other hand, the capability of the method to be changed according to the need is another important issue. Finite Element method provides relativ...
متن کاملThe Effect of Magnet Width and Iron Core Relative Permeability on Iron Pole Radii Ratio in Spoke-Type Permanent-Magnet Machine: An Analytical, Numerical and Experimental Study
In this paper, we present a mathematical model for determining the optimal radius of the iron pole shape in spoke-type permanent-magnet (PM) machines (STPMM) in order to minimize the pulsating torque components. The proposed method is based on the formal resolution of the Laplace’s and Poisson’s equations in a Cartesian pseudo-coordinate system with respect to the relative permeability effect o...
متن کامل