Effect of Aging Treatment on Microstructure and Mechanical Properties of Ti27Nb2Ta3Zr β Titanium Alloy for Implant Applications
نویسندگان
چکیده
This work aims to clarify the influence of aging temperature and time on the microstructure and mechanical properties of the TiNb alloy for biomedical applications. The ingot of Ti27Nb2Ta3Zr alloy was subjected to the arc melting, hot-forging and heat treatment respectively. Microstructure characterization was investigated by optical microscope (OM), X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The tensile tests showed an upward trend of the volume fraction of 1⁄2 phase and ¡ phase with the increase of aging time. When the aging temperature was higher than 673K, the amount of ellipsoid-shaped 1⁄2 phase precipitation decreased and needle-like ¡ phase appeared, which contributed to higher tensile strength, lower Young’s modulus and better plasticity. [doi:10.2320/matertrans.M2013187]
منابع مشابه
THE EFFECT OF AGING TREATMENT ON MECHANICAL PROPERTIES OFAA6082 ALLOY: MODELINGAND EXPERIMENT
Abstract: properties of AA6082 aluminum alloy. Considering that aging phenomenon affects the distribution of alloying elementin matrix, and the fact that different distribution of alloying elements has different impediments to dislocationmovement, a material model based on microstructure, has been developed in this research. A relative volume fractionor mean radius of precipitations is introduc...
متن کاملInvestigation into Aging Effect on Wear Behavior of Titanium Alloy
Ti-6Al-4V titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. In the current research, the effect of aging treatment on microstructure and wear behavior of Ti-6Al-4V titanium alloy was investigated. Pin on disk wear test was applied to assess the wear behavior. Specimens were first solut...
متن کاملEFFECT OF CONTROLLED QUENCHING ON THE AGING OF 2024 ALUMINUM ALLOY CONTAINING BORON
The presence of alloying elements, sometimes in a very small amount, affects mechanical properties one of these elements is Boron. In Aluminum industries, Boron master alloy is widely used as a grain refiner In this research, the production process of Aluminum –Boron master alloy was studied at first then, it was concurrently added to 2024 Aluminum alloy. After rolling and homogenizing the resu...
متن کاملFatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
Nowadays modification of metallic biomaterials which are used as implants for bone and hard tissues replacement is considered as an important subject. In the current study, corrosion fatigue properties of Ti-6Al-4V alloy investigated via Rotating-Bending standard test method and then, the results compared with the fatigue properties of the specimens tested in the same conditions. Scanning elect...
متن کاملThe Effect of Tempering Treatment on the Microstructure and Mechanical Properties of DIN 1.4021 Martensitic Stainless Steel
To investigate the effect of tempering treatment on mechanical properties and the microstructure of DIN 1.4021 Martensitic Stainless Steel, austenite treatment was conducted for the samples at 1000 ºC temperature for 60 min and then the samples were oil quenched. Later, tempering treatments were performed for the samples at 500 ºC and 700 ºC temperatures for 2 and 5 h, respectively; then quench...
متن کامل