Effect of tethering on the surface dynamics of a thin polymer melt layer.

نویسندگان

  • Gökçe Uğur
  • Bulent Akgun
  • Zhang Jiang
  • Suresh Narayanan
  • Sushil Satija
  • Mark D Foster
چکیده

The surface height fluctuations of a layer of low molecular weight (2.2k) untethered perdeuterated polystyrene (dPS) chains adjacent to a densely grafted polystyrene brush are slowed dramatically. Due to the interpenetration of the brush with the layer of "untethered chains" a hydrodynamic continuum theory can only describe the fluctuations when the effective thickness of the film is taken to be that which remains above the swollen brush. The portion of the film of initially untethered chains that interpenetrates with the brush becomes so viscous as to effectively play the role of a rigid substrate. Since these hybrid samples containing a covalently tethered layer at the bottom do not readily dewet, and are more robust than thin layers of untethered short chains on rigid substrates, they provide a route for tailoring polymer layer surface properties such as wetting, adhesion and friction.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of a nano-sized filler on the structure and dynamics of a simulated polymer melt and the relationship to ultra-thin films

We perform molecular dynamics simulations of an idealized polymer melt surrounding a nanoscopic filler particle to probe the effects of a filler on the local melt structure and dynamics. We show that the glass transition temperature Tg of the melt can be shifted to either higher or lower temperatures by appropriately tuning the interactions between polymer and filler. A gradual change of the po...

متن کامل

Dip coating of silica layer on melt-spun Finemet ribbons: surface morphology and electrical resistivity changes

In this study, melt-spun Finemet ribbons were coated by a thin layer of SiO2 using dip coating method. Amorphous ribbon prepared by melt spinning method and dip coating were done by using a solution of tetraethylen orthosilicate as a SiO2 precursor, ethanol as solvent and distilled water for hydrolysis. Different thicknesses of SiO2 layer, namely 304, 349, 451, 526 and 970 nm were obtained prop...

متن کامل

Molecular dynamics simulation of a polymer melt with a nanoscopic particle

We perform molecular dynamics simulations of a bead-spring polymer melt surrounding a nanoscopic particle. We explore the effect of the polymer/nanoparticle interactions, surface-to-volume ratio, and boundary conditions on both the structure and dynamics of the polymer melt. We find that the chains near the nanoparticle surface are elongated and flattened and that this effect is independent of ...

متن کامل

Influence of Sodium Tripolyphosphate Concentration on Characteristics and Performance of Polyamide Thin Layer Membrane in Cu (II) Removal

In this work, the effect of presence of the sodium tripolyphosphate (STPP), as an inorganic salt, on improving the performance of polyamide (PA) thin layer membranes has been studied. Characterization analyses confirmed the presence of the salt on the whole surface structure of the thin layer. Different salt loadings resulted in different fluxes and Cu (II) rejections. The thin layer containing...

متن کامل

Shear rate threshold for the boundary slip in dense polymer films.

The shear rate dependence of the slip length in thin polymer films confined between atomically flat surfaces is investigated by molecular dynamics simulations. The polymer melt is described by the bead-spring model of linear flexible chains. We found that at low shear rates the velocity profiles acquire a pronounced curvature near the wall and the absolute value of the negative slip length is a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Soft matter

دوره 12 24  شماره 

صفحات  -

تاریخ انتشار 2016