Optimization of power output and study of electron beam energy spread in a Free Electron Laser oscillator

Design of a multi-stage depressed collector for efficient operation of a Free Electron Laser (FEL) oscillator requires knowledge of the electron beam energy distribution. This knowledge is necessary to determine the voltages of the depressed collector electrodes that optimize the collection efficiency and overall energy conversion efficiency of the FEL. The energy spread in the electron beam is due to interaction in the wiggler region, as electrons enter the interaction region at different phases relative to the EM wave. This interaction can be simulated well by a three-dimensional simulation code such as FEL3D. The main adjustable parameters that determine the electron beam energy spread after interaction are the e-beam current, the initial beam energy, and the quality factor of the resonator out-coupling coefficient. Using FEL3D, we study the influence of these parameters on the available radiation power and on the electron beam energy distribution at the undulator exit. Simulations performed for I 1⁄4 1:5A, E 1⁄4 1:4MeV, L 1⁄4 20% (internal loss factor) showed that the highest radiated output power and smallest energy spread are attained for an output coupler transmission coefficient TmD30%. r 2001 Published by Elsevier Science B.V. PACS: 41.60. m; 41.60.Cr; 41.85.Qg