Epitaxial InGaAsP/InP photodiode for registration of InP scintillation

نویسندگان

  • S. Luryi
  • M. Stanacevic
  • V. Kuzminsky
  • W. Cheng
  • V. Smagin
چکیده

Operation of semiconductor scintillators requires optically tight integration of the photoreceiver system on the surface of the scintillator slab. We have implemented an efficient and fast quaternary InGaAsP pin photodiode, epitaxially grown on the surface of an InP scintillator wafer and sensitive to InP luminescence. The diode is characterized by an extremely low room-temperature dark current, about 1 nA/cm at the reverse bias of 2 V. The low leakage makes possible a sensitive readout circuitry even though the diode has a large area (1 1 mm) and therefore large capacitance (50 pF). Results of electrical, optical and radiation testing of the diodes are presented. Detection of individual a-particles and g-photons is demonstrated. & 2010 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Strong Optical Filed Intensity Improvement Introducing InGaAsP Quantum Wells in InP Nanocavity

This paper presents the optical characteristics of a quantum well doped InP nanocavity.The resonance wavelength of the nanocavity and the optical field intensity is calculated before and after presence of the quantum wells. The resulting huge filed intensity of about 1.2×108 respect to the incident field is the effect of quantum wells placed in vicinity of center of nanocavity.

متن کامل

DESIGN AND PROPERTIES OF InGaAs/InGaAsP/InP AVALANCHE PHOTODIODE

An avalanche photodiode (APD) based on an InGaAs/InGaAsP/InP structure containing separated absorption, charge and multiplication layers (SACM) was designed, fabricated and tested. The InGaAsP charge layer at the heterointerface between the InGaAs absorption and InP multiplication region allows optimization of the electric field distribution and suppression of the carrier capture at the heteroi...

متن کامل

Design of Photonic Crystal Polarization Splitter on InP Substrate

In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...

متن کامل

Analysis of InGaAsP-InP Double Microring Resonator using Signal Flow Graph Method

The buried hetero-structure (BH) InGaAsP-InP waveguide is used for asystem of double microring resonators (DMR). The light transmission and location ofresonant peaks are determined for six different sets of ring radii with different ordermode numbers. The effect of changing middle coupling coefficient on the box likeresponse is studied. It is found that the surge of coupling coefficient to the ...

متن کامل

High Quality III-V Semiconductors/Si Heterostructures for Photonic Integration and Photovoltaic Applications

High Quality III-V Semiconductors/Si Heterostructures for Photonic Integration and Photovoltaic Applications Himanshu Kataria TRITA-ICT/MAP AVH Report 2014:13; ISSN 1653-7610; ISRN KTH/ICT-MAP/AVH-2014:13-SE ISBN 978-91-7595-289-5 Abstract This thesis deals with one of the promising strategies to monolithically integrate III-V semiconductors with silicon via epitaxial lateral overgrowth (ELOG) ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010