Irradiation Induced Microstructure Evolution in Nanostructured Materials: A Review

نویسندگان

  • Wenbo Liu
  • Yanzhou Ji
  • Pengkang Tan
  • Hang Zang
  • Chaohui He
  • Di Yun
  • Chi Zhang
  • Zhigang Yang
چکیده

Nanostructured (NS) materials may have different irradiation resistance from their coarse-grained (CG) counterparts. In this review, we focus on the effect of grain boundaries (GBs)/interfaces on irradiation induced microstructure evolution and the irradiation tolerance of NS materials under irradiation. The features of void denuded zones (VDZs) and the unusual behavior of void formation near GBs/interfaces in metals due to the interactions between GBs/interfaces and irradiation-produced point defects are systematically reviewed. Some experimental results and calculation results show that NS materials have enhanced irradiation resistance, due to their extremely small grain sizes and large volume fractions of GBs/interfaces, which could absorb and annihilate the mobile defects produced during irradiation. However, there is also literature reporting reduced irradiation resistance or even amorphization of NS materials at a lower irradiation dose compared with their bulk counterparts, since the GBs are also characterized by excess energy (compared to that of single crystal materials) which could provide a shift in the total free energy that will lead to the amorphization process. The competition of these two effects leads to the different irradiation tolerance of NS materials. The irradiation-induced grain growth is dominated by irradiation temperature, dose, ion flux, character of GBs/interface and nanoprecipitates, although the decrease of grain sizes under irradiation is also observed in some experiments.

منابع مشابه

Review on ultrafined/nanostructured magnesium alloys produced through severe plastic deformation: microstructures

A review on the microstructural evolution in magnesium alloys during severe plastic deformation waspresented. The challenges deserved to achieve ultrafine/ nanostructured magnesium were discussed.The characteristics of the processed materials are influenced by three main factors, including i)difficult processing at low temperatures, ii) high temperature processing and the occurrence ofdynamic r...

متن کامل

A review: applications of the phase field method in predicting microstructure and property evolution of irradiated nuclear materials

Complex microstructure changes occur in nuclear fuel and structural materials due to the extreme environments of intense irradiation and high temperature. This paper evaluates the role of the phase field method in predicting the microstructure evolution of irradiated nuclear materials and the impact on their mechanical, thermal, and magnetic properties. The paper starts with an overview of the ...

متن کامل

Theory and numerical simulations of defect ordering in irradiated materials.

A general theory for the spatial ordering of immobile clustered defects in irradiated materials is presented here. A vectorial form for the Fourier transforms of perturbations in the concentration of point and clustered defects is derived. Linear stability analysis indicates that, under conditions appropriate for void growth ~high temperature!, instabilities leading to spatially ordered microst...

متن کامل

Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment

In terms of the grain refinement mechanism induced by plastic straining, a novel surface mechanical attrition treatment (SMAT) was developed for synthesizing a nanostructured surface layer on metallic materials in order to upgrade the overall properties and performance. In this paper, the SMAT technique and the microstructure of the SMAT surface layer will be described. The grain refinement mec...

متن کامل

Evolution of texture in an ultrafine and nano grained magnesium alloy

The evolution of texture was discussed during the formation of ultra-fine and nano grains in a magnesium alloy severely deformed through accumulative back extrusion (ABE). The microstructure and texture obtained after applying multiple deformation passes at temperatures of 100 and 250°C were characterized. The results showed that after single ABE pass at 100°C an ultrafine/nano grained microstr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

متن کامل
عنوان ژورنال:

دوره 9  شماره 

صفحات  -

تاریخ انتشار 2016