Output-only modal analysis using blind source separation techniques
نویسندگان
چکیده
The present study carries out output-only modal analysis using two blind source separation (BSS) techniques, namely independent component analysis and second-order blind identification. The concept of virtual source is exploited and renders the application of these BSS techniques possible. The proposed modal analysis method is illustrated using numerical and experimental examples. r 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Operational Modal Analysis using Second-Order Blind Identification
For modal analysis of large structures, it is unpractical and expensive to use artificial excitation (e.g., shakers). However, engineering structures are most often subject to ambient loads (e.g., traffic and wind) that can be exploited for modal parameter estimation. One difficulty is that the actual loading conditions cannot generally be measured, and output-only measurements are available. T...
متن کاملApplication of Independent Component Analysis and Blind Source Separation Techniques to Operational Modal Analysis
Independent Component Analysis (ICA) / Blind Source Separation (BSS) is an emerging research area in the field of signal processing. The goal of ICA / BSS techniques is to identify statistically independent and non-Gaussian sources from a linear mixture of such sources. It also extracts the unknown mixture matrix in the process. The purpose of this paper is to explore the possibilities of utili...
متن کاملA blind source separation based approach for modal parameter estimation in traditional input-output eperimental modal analysis framework (bn1724)
Though Blind Source Separation (BSS) techniques have typically been applied within Operational Modal Analysis (OMA) framework, there joint diagonalization property can also be utilized within traditional input-output Experimental Modal Analysis (EMA) for the purpose of modal parameter estimation. This paper explores this possibility and suggests an approach to achieve the same. The paper presen...
متن کاملUtilization of Blind Source Separation Techniques for Modal Analysis
In past few years, there have been attempts at utilizing Blind Source Separation (BSS) and Independent Component Analysis (ICA) techniques for modal analysis purposes. Most of the early work in this regard has been promising, though restricted to application of these techniques to analytical and laboratory based experimental structures. It is felt that in order to make these techniques applicab...
متن کاملFault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor
In the field of structural health monitoring or machine condition monitoring, most vibration based methods reported in the literature require to measure responses at several locations on the structure. In machine condition monitoring, the number of available vibration sensors is often small and it is not unusual that only one single sensor is used to monitor a machine. The aim of this paper is ...
متن کامل