An introduction to Eddy Current Testing
نویسنده
چکیده
This document is intended as a brief familiarisation course for Hocking NDT’s customers and sales representatives. It is not intended as a complete theoretical course in Eddy Current Non destructive testing and a number of aspects are intentionally simplified. The bibliography at the end of the document details several appropriate reference books which should be consulted if a more complete understanding is required
منابع مشابه
Design of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کاملSingle-tone and Polyharmonic Eddy Current Metal Detection and Non-Destructive Testing Education Software
This paper describes the design of a measuring chain for polyharmonic metal detectors used for education in laboratory exercises at Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Measurement. The Measuring chain is composed of DDS signal generator, Digitiser and PC with software programmed in Labview. Eddy current principles or more specifically eddy curr...
متن کاملQUALITY CONTROL OF PRECIPITATION HARDENED ALUMINIUM ALLOY PARTS VIA EDDY-CURRENT NONDESTRUCTIVE EVALUATION
Precipitation hardening is the most common method in the strengthening of aluminium alloys. This method relies on the decrease of solid solubility with temperature reduction to produce fine precipitations which impede the movement of dislocations. The quality control of aluminium alloy specimens is an important concern of engineers. Among different methods, non-destructive techniques are the...
متن کاملCorrosion Steel Inspection under Steel Plate Using Pulsed Eddy Current Testing
Pulsed eddy current inspection techniques were derived from the conventional eddy current testing technology, based on the fundamental principle of an eddy current coil, but using periodic ultrasound pulses. The authors first introduce the principle of pulsed eddy current inspection and some experimental measurement results using pulsed eddy current equipment. This technology can be applied to ...
متن کاملGiant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications
Non-destructive eddy current testing (ECT) is widely used to examine structural defects in ferromagnetic pipe in the oil and gas industry. Implementation of giant magnetoresistance (GMR) sensors as magnetic field sensors to detect the changes of magnetic field continuity have increased the sensitivity of eddy current techniques in detecting the material defect profile. However, not many researc...
متن کامل