Multilayer thin-film structures with high spatial dispersion.
نویسندگان
چکیده
We demonstrate how to design thin-film multilayer structures that separate multiple wavelength channels with a single stack by spatial dispersion, thus allowing compact manufacturable wavelength multiplexers and demultiplexers and possibly beam-steering or dispersion-control devices. We discuss four types of structure--periodic one-dimensional photonic crystal superprism structures, double-chirped structures exploiting wavelength-dependent penetration depth, coupled-cavity structures with dispersion that is due to stored energy, and numerically optimized nonperiodic structures utilizing a mixture of the other dispersion effects. We experimentally test the spatial dispersion of a 200-layer periodic structure and a 66-layer nonperiodic structure. Probably because of its greater design freedom, the nonperiodic structure can give both a linear shift with wavelength and a larger usable shift than the thicker periodic structure gives.
منابع مشابه
Multilayer thin-film coatings for optical communication systems
Recent developments in thin-film coatings for optical communication systems are reviewed. Particular emphasis is given to thin-film designs with dispersion related to the photonic crystal superprism effect. A single dispersive coating may be used for multiplexing or demultiplexing several wavelength channels by spatial beam shifting. 2004 Optical Society of America OCIS codes: (310.0310) Thin ...
متن کاملThin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS
In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...
متن کاملSimple design method for third-order dispersion compensation with a thin-film dispersion compensator.
A novel and simple numerical method for finding the best thin-film structures for third-order dispersion compensation has been achieved. A target third-order dispersion value is specified first; then the multilayer thin-film structure is optimized to have a second-order dispersion spectrum, which has the least deviation from linearity and has a slope that equals the specified third-order disper...
متن کاملLimits on the performance of dispersive thin-film stacks.
Dispersive thin-film stacks are interesting as compact, cost-effective devices for temporal dispersion compensation and wavelength multiplexing. Their performance depends on the total group delay or spatial shift that can be achieved. For general multilayer stacks, no analytic model exists relating the performance to the stack parameters such as the refractive indices and the number of layers. ...
متن کاملHigh Gas Barrier Materials with Multilayer Morphology for Packaging Applications
Multilayer films are widely used in packaging industry to fulfil different applications. It is well known that multilayer structure is essential for high gas barrier packaging using EVOH, because moisture has negative effects on EVOH’s barrier properties [1, 2]. In order to effectively use EVOH in barrier applications, usually a moisture barrier layer and a tie layer are required [3, 4]. In thi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 42 7 شماره
صفحات -
تاریخ انتشار 2003