Numerical Experiments for the Study of the Influence of Wavelength in Laser Impact onto Metals and Alloys
نویسنده
چکیده
The program TEMPERATURFELD3D, working in MATLAB, has been used to conduct numerical experiments. The study of the influence of the wavelength of the laser, is pertained to CuBr laser (λ1 = 511 nm), ruby laser (λ2 = 690 nm), diode laser (λ3 = 940 nm), fiber laser (λ4 = 1,06 μm) and CO2-laser (λ5 = 10,6 μm). Numerical experiments with different types of lasers are for the same power density and speed. A Graph of the dependence of the maximum temperature of the heating on the surface of the product from the wavelength is built. The obtained results are analyzed.
منابع مشابه
Numerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism
In this paper the process of laser forming has been investigated using an analytical and an experimental method for three levels scans velocity. A coupled analysis has been performed in ANSYS®. Also in order to prove the predictive methods, experiments on thin sheet metals have been done when a laser of a fair power was used. Before done, experiments were designed with full factorial chosen as ...
متن کاملA Numerical Study on Aluminum Plate Response under Low Velocity Impact
In the present paper, a numerical study is performed to investigate the response of different plates aluminum alloys subjected to low velocity impact condition. In this regard, the square AA5083-H116 aluminum plates with dimensions 300×300 and 3 mm and 5 mm thick under low velocity impact are modelled, and a mesh convergence study is carried out to decide the appropriate number of elements. In ...
متن کاملExperimental and numerical study of heat flux distribution in laser forming of bi-layer sheets
Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...
متن کاملTemperature Distribution of Particles in a Laser Beam
This article studies the particle temperature distribution depending on the laser radiation power and the particle’s trajectory and velocity. The uneven heating of particles moving in the laser radiation field is identified. The regimes of laser heating without melting, with partial melting, and with complete particle melting are considered.
متن کاملEXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard softwa...
متن کامل