Water Vapor Barrier Properties of Coated and Filled Microfibrillated Cellulose Composite Films

نویسندگان

  • Kelley L. Spence
  • Richard A. Venditti
  • Orlando J. Rojas
  • Joel J. Pawlak
  • Martin A. Hubbe
چکیده

Microfibrillated celluloses (MFCs) have mechanical properties sufficient for packaging applications but lack water vapor barrier properties in comparison to petroleum-based plastics. These properties can be modified by the use of mineral fillers, added within the film structure, or waxes, as surface coatings. In this investigation it was determined that addition of fillers resulted in films with lower densities but also lower water vapor transmission rates (WVTR). This was hypothesized to be due to decreased water vapor solubility in the films. Associated transport phenomena were analyzed by the Knudsen model for diffusion but due to the limited incorporation of chemical factors in the model and relatively large pore sizes, accurate prediction of pore diameters for filled films was not possible with this model. Modeling the filled-films with Fick’s equation, however, takes into account chemical differences, as observed by the calculated tortuosity values. Interestingly, coating with beeswax, paraffin, and cooked starch resulted in MFC films with water vapor transmission rates lower than those for low density polyethylene. These coatings were modeled with a three-layer model which determined that coatings were more effective in reducing WVTR.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Facile Pathway to Modify Cellulose Composite Film by Reducing Wettability and Improving Barrier towards Moisture

The hydrophilic property of cellulose is a key limiting factor for its wide application. Here, a novel solution impregnation pathway was developed to increase the hydrophobic properties of cellulose. When compared with the regenerated cellulose (RC), the composite films showed a decrease in water uptake ability towards water vapor, and an increase of the water contact angle from 29° to 65° with...

متن کامل

Gas and Water Vapor Barrier Properties of Edible Films from Protein and Cellulosic Materials

Edible films were made from proteins (corn-zein and wheat gluten) and celluloses (methyl cellulose and hydroxypropyl cellulose), and tested fog permeability of gases. Oxygen and carbon dioxide permeabilities of edible films were generally lower than those of plastic films. However, water vapor permeabilities of edible films were higher than those of plastic films. The concentration of plasticiz...

متن کامل

Nanocellulose reinforced chitosan composite films as affected by nanofiller loading and plasticizer content.

UNLABELLED Chitosan is a biopolymer obtained by N-deacetylation of chitin, produced from shellfish waste, which may be employed to elaborate edible films or coatings to enhance shelf life of food products. This study was conducted to evaluate the effect of different concentrations of nanofiller (cellulose nanofibers, CNF) and plasticizer (glycerol) on tensile properties (tensile strength-TS, el...

متن کامل

Mechanism for Tuning the Hydrophobicity of Microfibrillated Cellulose Films by Controlled Thermal Release of Encapsulated Wax

Although films of microfibrillated cellulose (MFC) have good oxygen barrier properties due to its fine network structure, properties strongly deteriorate after absorption of water. In this work, a new approach has been followed for actively tuning the water resistance of a MFC fiber network by the inclusion of dispersed organic nanoparticles with encapsulated plant wax. The modified pulp suspen...

متن کامل

Preparation and properties of composite films from modified cellulose fibre-reinforced with PLA

Now a day there is an emerging interest in replacing non-renewable additives with biodegradable compounds. Cellulose plays very important role in this modification. Their low cost and low density associated with high specific mechanical properties represent a good renewable and biodegradable alternative to the most commonly used synthetic reinforcement. The cellulose was modified by using 2-(Tr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011