Multiplier-free Filter Design Using Lt Comb Filters
نویسندگان
چکیده
ABSTRACT This paper present on simple method for multiplier-free finite impulse response (FIR) filter design based on the cascade of comb and linearly tapered comb filters. The stopband frequency determines the length of the comb filter. The method is used for narrowband filters where the passband frequency is not more than 0.1 of the stopband frequency. The sharpening technique is used to satisfy the desired stopband attenuation and the minimum passband ripple.
منابع مشابه
Improved Maximally Flat Wideband CIC Compensation Filter using Sharpening Technique
This paper presents the design and implementation of sharpening of maximally flat cascaded integrator comb compensation filters. The modified sharpened cascaded integrator comb compensation filter is used to improve magnitude response and gain. For wide-band compensation fourth-order linear phase filters is considered. The decimation factor of CIC filter is D and number of adders are depends up...
متن کاملComb-based Method for Narrowband Fir Filter Design
FIR (Finite impulse response) digital filters are known to have some very desirable properties such as linear phase, stability, and absence of limit cycle. However their applications generally require more computation. In this paper we consider the simple method to design a multiplier-less narrowband FIR filter. The method is based on well known IFIR (Interpolated FIR) structure. The novelty of...
متن کاملFIR filter design using highly non-linear LADF sigma-delta modulator architecture
In this paper we investigate the performance of multiplier free FIR filter design using an extremely non-linear Σ-∆ architecture. This architecture which is known as the Look Ahead Decision Feedback (LADF) circuit [1], has not been used in FIR filter design earlier. The circuit is highly non-linear because of the thresholding operation in the architecture. In this paper, we compare the LADF arc...
متن کاملTime-area efficient multiplier-free recursive filter architectures for FPGA implementation
Simultaneous design of multiplier-free recursive filters (IIR filters) and their hardware implementation in Xilinx Field Programmable Gate Array (XC4000) is presented. The hardware design methodology leads to high performance recursive filters with sampling frequencies in the interval 15-21 MHz (17 bits internal data representation). It will be demonstrated that time-area eficiency and performa...
متن کاملA Novel Diversity-Controlled Genetic Algorithm for Optimization of BIBO Stable Digital IF Filters Over CSD Multiplier Coefficient Space
This paper presents a novel diversity-controlled (DC) genetic algorithm (GA) for the optimization of digital Intermediate Frequency (IF) filters over the (finiteprecision) canonical signed-digit (CSD) multiplier coefficient space. This optimization exploits the bilinear-losslessdiscrete-integrator (bilinear-LDI) lattice digital filter design approach for the realization of the required infinite...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006