Analysis of non-stationary signals in power systems
نویسنده
چکیده
Received the M.Sc. and PhD degrees in electrical engineering from the Wroclaw University of Technology, Poland in 1997 and 2001 respectively. The NATO Organisation awarded Dr. Leonowicz an Advanced Fellowship in 2001 and he spent this fellowship at the Technical University of Dresden (Germany). He has been with the Department of Electrical Engineering at the Wroclaw University of Technology (Poland), since 1997 and with the Advanced Brain Signal Processing Laboratory, Brain Science Institute, Riken, Wako-shi (Japan), since 2003. His current research interests include modern digital signal processing methods.
منابع مشابه
A New High Frequency Grid Impedance Estimation Technique for the Frequency Range of 2 to150 kHz
Grid impedance estimation is used in many power system applications such as grid connected renewable energy systems and power quality analysis of smart grids. The grid impedance estimation techniques based on signal injection uses Ohm’s law for the estimation. In these methods, one or several signal(s) is (are) injected to Point of Common Coupling (PCC). Then the current through and voltage of ...
متن کاملDiscrimination of Power Quality Distorted Signals Based on Time-frequency Analysis and Probabilistic Neural Network
Recognition and classification of Power Quality Distorted Signals (PQDSs) in power systems is an essential duty. One of the noteworthy issues in Power Quality Analysis (PQA) is identification of distorted signals using an efficient scheme. This paper recommends a Time–Frequency Analysis (TFA), for extracting features, so-called "hybrid approach", using incorporation of Multi Resolution Analysis...
متن کاملAnalysis of non-stationary electric signals using the S-transform
Purpose – The purpose of this paper is to compare the accuracy of tracking the amplitude and frequency changes of non-stationary electric signals. Design/methodology/approach – Short-time fourier transform (STFT) and S-transform algorithms were applied to analyze non-stationary signals originating from switching of capacitor banks in a power system. Findings – The S-transform showed possibiliti...
متن کاملFeature Extraction Techniques of Non-Stationary Signals for Fault Diagnosis in Machinery Systems
Previously, fault diagnosis of fixed or steady state mechanical failures (e.g., pumps in nuclear power plant turbines, engines or other key equipment) applied spectrum analysis (e.g., fast Fourier transform, FFT) to extract the frequency features as the basis for identifying the causes of failure types. However, mechanical equipment for increasingly instant speed variations (e.g., wind turbine ...
متن کاملA Time-Frequency approach for EEG signal segmentation
The record of human brain neural activities, namely electroencephalogram (EEG), is generally known as a non-stationary and nonlinear signal. In many applications, it is useful to divide the EEGs into segments within which the signals can be considered stationary. Combination of empirical mode decomposition (EMD) and Hilbert transform, called Hilbert-Huang transform (HHT), is a new and powerful ...
متن کاملNonlinear Analysis of Interaction with SVC in Stressed Power Systems: Effect of SVC Controller Parameters
In this paper, the effect of Static VAr Compensator (SVC) parameters on the nonlinear interaction of steam power plant turbine-generator set is studied using the Modal Series (MS) method. A second order representation of a power system equipped with SVC is developed and then by MS method the nonlinear interaction of torsional modes is assessed under various conditions and the most influencing f...
متن کامل