Wood Processing and Pulping Process (fwm 504) Logging

ثبت نشده
چکیده

Logging industry is a fast-growing business regardless of the many risks involved. The procedures used to harvest wood are tree-length, full-length and cut-to-length logging. Choosing one over the other is simply a matter of choice since there are advantages and disadvantages with each of the various methods. The removal of too many trees from the forest can cause environmental hazards as well as the possible loss of our wildlife. Regardless, this industry is a business that provides the consumer with many needed products. It is, therefore, important to know the impact of logging methods on the forest environment and make wise decisions regarding our natural. Even though it is very risky, it is still is considered as a profitable market today. It is the primary source for many industries, including the thriving paper industry, lumber and fodder for animal feed. It is also used for other purposes such as the construction of buildings, wood fuel and many other forestry-related products.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Process intensification in mechanical pulping

Process intensification is a term used in the chemical process industry for major improvements in the process design leading to radical changes in process complexity, equipment size and efficiency. We suggest that a similar approach is applied in the pulp and paper industry. We have focused on the production of mechanical pulp, but a similar approach can be applied to other areas within the pul...

متن کامل

Dissolving Pulp (alpha-cellulose) from Corn Stalk by Kraft Process

Corn stalk can be used as an alternative non-wood raw material to produce cellulosic dissolving grade pulp. In this work, the potential of corn stalk in the production of dissolving pulp (alpha-cellulose) was investigated. It was collect ed from a corn stalk farm of Kermanshah, Iran. The sequences of experimental work were: water and acid prehydrolysis at 160˚C for 30min, followed by Kraft pulp...

متن کامل

A Kinetic Mathematical Model of Kraft Pulping Process for Control and Optimization Applications

Kraft wood pulping is the predominant process used in the pulp and paper industry for its versatility and insensitivity to variations of wood supply. In this work, a deterministic model has been developed for a Kraft Pulping Process of Eucalyptus by combining intrinsic kinetic equations (Lignin, Carbohydrates) and it is used to investigate the effects of process conditions on the extent of deli...

متن کامل

Degradation and Redeposition of the Chemical Components of Aspen Wood during Hot Water Extraction

Hot water extraction (HWE) prior to pulping of wood is a promising method in constructing a platform for traditional pulping or for biorefinery processing. In this study, HWE of aspen wood at a maximum reaction temperature (Treaction) between 140 and 180 oC was investigated to obtain an optimal extraction condition for wood-derived products. The effect of extraction temperature and reaction tim...

متن کامل

Prospects for Biodiesel as a Byproduct of Wood Pulping – a Review

Effective utilization of byproducts can affect the profitability of kraft pulping to produce cellulosic fibers from wood. This review considers opportunities to use tall oil components, obtained from kraft pulping, as a source of raw material for biodiesel fuel, or as a source of additives for petrodiesel. Considerable progress has been achieved with respect to converting vegetable oils to dies...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011