Scaling properties of coating flows in rectangular channels.

نویسندگان

  • A de Lózar
  • A L Hazel
  • A Juel
چکیده

We present an experimental study of the aspect-ratio dependence of two-phase displacement flows in channels of rectangular cross section. Above a buoyancy-dependent threshold Ca[over ;]_{t}, we find that the bulk features of the flow depend only on a modified capillary number Ca[over ;]=[1+0.12(alpha-1)+0.018(alpha-1);{2}]Ca, where Ca is the unmodified capillary number and alpha is the aspect ratio. This novel scaling has tremendous practical significance because it implies that the bulk features of the flows in any rectangular channel can be inferred from those in a square channel for Ca[over ;]>Ca[over ;]_{t}.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Analysis of Fully Developed Flow and Heat Transfer in Channels with Periodically Grooved Parts (TECHNICAL NOTE)

To obtain a higher heat transfer in the low Reynolds number flows, wavy channels are often employed in myriad engineering applications. In this study, the geometry of grooves shapes is parameterized by means of four angles. By changing these parameters new geometries are generated and numerical simulations are carried out for internal fully developed flow and heat transfer. Results are compared...

متن کامل

An approximate model for slug flow heat transfer in channels of arbitrary cross section

In this paper, a novel approximate solution to determine the Nusselt number for thermally developed, slug (low-prandtl), laminar, single phase flow in channels of arbitrary cross section is presented. Using the Saint-Venant principle in torsion of beams, it is shown that the thermally developed Nusselt number for low-prandtl flow is only a function of the geometrical parameters of the channel c...

متن کامل

Accurate characteristics of Helium in nano-channels

This article describes an accurate subPico flowmeter bifurcatedin to liquid and gas flowrates less than 1mol/s for both MEMS/NEMS and cryogenic technology applications. The MEMS/NEMS are described as either two Gauges (instrument), or quartz fluctuating forks, even if the liquid or gas flows through an element, as well as cryogenic technology consisting of arrays of e...

متن کامل

CFD SIMULATION OF FLOW OVER CONTRACTED COMPOUND ARCHED RECTANGULAR SHARP CRESTED WEIRS

Measurement of discharge in open channels is one of the main concerns in hydraulic engineering. The structures used for this aim should be accurate, economical and easy to use. Weirs are among the oldest and most convenient hydraulic structures that have been used in both laboratory and field for flow measurement in open channels. Due to limitations of simple sharp crested weirs, recently compo...

متن کامل

Accurate characteristics of Helium in nano-channels

This article describes an accurate subPico flowmeter bifurcatedin to liquid and gas flowrates less than 1mol/s for both MEMS/NEMS and cryogenic technology applications. The MEMS/NEMS are described as either two Gauges (instrument), or quartz fluctuating forks, even if the liquid or gas flows through an element, as well as cryogenic technology consisting of arrays of e...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 99 23  شماره 

صفحات  -

تاریخ انتشار 2007