Optimization of MVG for Control of Shock Boundary Layer Interaction
نویسندگان
چکیده
Based on the new theory of MVG to reduce separation caused by shock boundary layer interaction (SBLI), a new optimization method is presented in this paper. The key issue is to generate a proper momentum deficit zone, which can generate a strong shear layer and further strong vortex rings frequently, in front of shock. Several artificial momentum deficit zones (low speed streaks) are tested by LES and the efficiency of reduction of SBLI induced separation will be assessed.
منابع مشابه
Influence of Different Inlet Flow on the Ring-like Vortex Structure in MVG Controlled Supersonic Ramp Flow
In this paper, we study the influence on the ring-like vortex structure in MVG controlled supersonic ramp flow by different inflow conditions. In front of the MVG, three turbulent inflow profiles with different boundary layer thickness are generated as the inflow. From the shape factors, we can see that these inflows in front of the MVG are fully developed turbulent. It is found that the inflow...
متن کاملStudy of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model
Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged...
متن کاملNumerical Investigations on the Effects of the Declining Back-edge of MVG
Due to the background in the mixed compression engine inlets, the Shock wave/ Turbulent Boundary Layer Interaction (STBLI) problem has been one of the concerns of the aerodynamic industry. Shock-induced separation and the corresponding interaction make the flow losing its quality and reduce inlet total pressure recovery. Various flow-control methods have been tried and investigated by lots of r...
متن کاملLES for Supersonic Ramp Flow Control Using MVG at M_infty=3 and Re_theta=2400
In order to obtain the supersonic intake flow with the least total pressure losses caused by the shock-induced or –boundary-layer-interacted separation, flow controls are recently intensively studied by experiments [1] and numerical simulations [2] using control elements with the sub-boundary layer length scale in normal direction. These elements differ from the conventional ones, whose height ...
متن کاملThe Interaction between Vortex Rings and Oblique Shocks by the MVG Controlled Ramp Flow at M=2.5
In this paper, the implicitly implemented LES method and fifth order bandwidth-optimized WENO scheme are used to make comprehensive studies on the interaction of vortex rings and shock waves of the MVG controlled flow at M=2.5 and Re θ θ θ θ =5760. The kinetic information of the vortex rings is carefully studied and provided. The interaction of the streamwise vortices and vortex rings are inves...
متن کامل