High-repetition-rate femtosecond pulse generation in the blue.
نویسندگان
چکیده
We report the generation of high-repetition-rate femtosecond pulses in the blue by intracavity doubling of a mode-locked Ti:sapphire laser using ,f-BaB204. To reduce the pulse-broadening effect of group-velocity mismatch, an extremely thin p-BaB204 crystal is used. By pumping the Ti:sapphire laser with 4.4 W of power from an Ar' laser, as much as 230 mW of 430-nm light is produced at a 72-MHz repetition rate and a 89-fs pulse width. This represents an effective conversion efficiency of -75% from the typical infrared output to the second harmonic. Pulse widths as short as 54 fs are achieved for the blue output.
منابع مشابه
Efficient neutron generation from solid- nanoparticle explosions driven by DPSSL-pumped high-repetition rate femtosecond laser pulse
We propose novel neutron source using high-intensity laser based on the cluster fusion scheme. We developed DPSSL-pumped high-repetition-rate 20-TW laser system and solid nanoparticle target for neutron generation demonstration. In our neutron generation experiment, high-energy deuterons were generated from coulomb explosion of CD solidnanoparticles and neutrons were generated by DD fusion reac...
متن کاملHigh Repetition Rate Femtosecond WDM Pulse Generation using Direct Space-to-Time Pulse Shapers and Arrayed Waveguide Gratings
For the application of high repetition rate WDM pulse train generation from a femtosecond modelocked fiber laser, the direct space-to-time pulse shaper and a properly designed arrayed waveguide grating (AWG) are equivalent. The analogy between the bulk optics and integrated configuration is explored for this application. The critical design parameters of the AWG are the free spectral range and ...
متن کاملGeneration of terahertz-rate trains of femtosecond pulses by phase-only filtering.
We describe a simple linear filtering technique for transforming individual femtosecond light pulses into terahertzrepetition-rate bursts of femtosecond pulses. By using phase-only filtering, high efficiency is achieved. Pulse repetition rates approaching 6 THz are obtained.
متن کاملMicromachining with a High Repetition Rate Femtosecond Fiber Laser
Industrial micromachining applications with ultrashort pulse lasers are often difficult to make practical due to the lack of robustness of the laser and the slow processing speed resulting from the low repetition rate. In the past, amplified, femtosecond lasers produced high pulse energies, but at a slow pulse repetition rate of around a kHz. The high repetition rate oscillators did not have en...
متن کاملFemtosecond damage threshold at kHz and MHz pulse repetition rates
Femtosecond laser-induced damage threshold (LIDT) measurements for different optical components are well studied for a set of laser pulse repetition rates spanning the range between 1 Hz and 1 kHz. Recent years saw the advent of high-repetition-rate femtosecond systems with relatively high pulse energy. Therefore investigation of LIDT in the MHz region is essential. We performed several compara...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 17 5 شماره
صفحات -
تاریخ انتشار 1992