Frequency Reconfigurable Conformal Antennas for Wireless Networks

نویسنده

  • Y V B Reddy
چکیده

Frequency Reconfigurable antennas have received significant attention for their applications in communications, electronic surveillance and countermeasures, by adapting their properties to achieve selectivity in frequency, bandwidth, polarization and gain. This paper presents the design of reconfigurable conformal antenna for wireless LAN networks. The proposed antenna is suitable for Wireless networks (WLAN) for an operating frequency at 2.4 GHz. The antenna covers the 2.4 -2.464 GHz WLAN band with a return loss of -21 dB. In this paper the operation at two different frequency bands are presented. The switching between the different frequency bands is achieved by using diode switch.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of a BIBD Based Directional MAC Protocol for Wireless Ad Hoc Networks

The use of directional antennas in wireless ad hoc networks can significantly improve global performance due to a high spatial channel reuse. Nevertheless, its introduction poses new location dependent problems related to the MAC protocol. In this paper, the Balanced Incomplete Block Design theory has been exploited to develop a new MAC protocol for wireless ad hoc networks using directional ant...

متن کامل

Wearable Conformal Antennas for 2.4 GHz Wireless Body Area Networks

Microstrip fed inset patch antennas embedded in planar and cylindrically curved surfaces are introduced to be used in Body Area Networks (BANs) presented. These antennas are designed as wearable antennas for industrial, scientific and medical (ISM) band wireless communication networking. The proposed antennas consist of 50 Ω microstrip line feeding inset patch printed on the front face of diele...

متن کامل

Reconfigurable Microstrip Double-Dipole Antennas for Personal Wireless Communications

In this paper, a number of reconfigurable antennas are designed to support multiband and wideband wireless applications in different frequency bands in the range between 1 GHz and 6 GHz. The proposed designs consist of microstrip-fed two dipoles through simplified balun. By controlling the lengths of the dipoles by connecting or disconnecting slots, we are able to change the antenna operating f...

متن کامل

Reconfigurable antennas and radio wave propagation at millimeter-wave frequencies

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Vasilii Semkin Name of the doctoral dissertation Reconfigurable antennas and radio wave propagation at millimeter-wave frequencies Publisher School of Electrical Engineering Unit Department of Radio Science and Engineering Series Aalto University publication series DOCTORAL DISSERTATIONS 151/2016 Field of research Radio Engine...

متن کامل

Conical Conformal Antenna Design using the CPM Method for MIMO Systems

Abstract- In this article, the design of conformal antennas has been discussed using the characteristic modes (CM) method. For this purpose, the vector wave function(VWF) has been utilized to achieve a two-dimensional mapping of the conformal antenna. In designing and analyzing of cone-shaped antennas applicable for multi-input multi-output (MIMO) systems, the most important goal is to achieve ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011