Discrete-Time Immersion and Invariance Adaptive Control of a Slider-crank Mechanism
نویسنده
چکیده
A discrete-time adaptive nonlinear control procedure is developed based on immersion and invariance control, and using back-stepping for the regulation of slider-crank system. A convenient parametric formulation of the system dynamics is established. A novel parameter estimator design is presented, and the back-stepping controller is constructed considering the certainty equivalence principle.
منابع مشابه
Nonlinear Dynamics and Control of Crank-Slider Mechanism with Multiple Clearance Joints
In the current study, behavior of crank-slider mechanism with single and multiple clearance joints are analyzed. Using Lankarani-Nikravesh theory for estimating discontinuous contact forces in clearance joints, relevant systems have been mathematically modeled. Through numerical simulations, perturbations in response of mechanisms with clearance joints have been analyzed. Effects of increasing ...
متن کاملPareto Optimal Multi-Objective Dynamical Balancing of a Slider-Crank Mechanism Using Differential Evolution Algorithm
The present paper aims to improve the dynamical balancing of a slider-crank mechanism. This mechanism has been widely used in internal combustion engines, especially vehicle engines; hence, its dynamical balancing is important significantly. To have a full balance mechanism, the shaking forces and shaking moment of foundations should be eliminated completely. However, this elimination is usuall...
متن کاملVibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study
In this paper, the experimental vibration analysis of a single cylinder air compressor based on a hypocycloid straight line mechanism (HSM) is investigated. The HSM mechanism uses planetary gears to convert rotational motion to purely linear motion. In the conventional air compressor, the slider- crank mechanism is replaced by the HSM mechanism with appropriate counterweights. The constructed s...
متن کاملPC-based pseudo-model following discrete integral variable structure control of positions in slider-crank mechanisms
This paper proposes a pseudo-model following (PMF) discrete integral variable structure control (DIVSC) scheme to control the position of a slider crank coupled with a pseudo-model (PM) synchronous motor. Applying the Grey modeling method, the reference model and plant are on-line converted to pseudo-reference model and accumulated model, respectively. The advantage is that the least data and m...
متن کاملطراحی و ساخت مکانیزم بردارنده و انتقال دهنده میوههای کروی شکل
The objective of this research was to design and develope a Pick and Position system to displace spherical-shaped fruits, with minimum damage to flesh, from one specific place to another. A mechanical gripper (end-effector) suitable for grasping spherical-shaped fruits with 5-9 cm in diameter was designed and developed. The primary goal of the gripper design was to take and release the fruit wi...
متن کامل