A Self-Supported Direct Borohydride-Hydrogen Peroxide Fuel Cell System
نویسندگان
چکیده
A self-supported direct borohydride-hydrogen peroxide fuel cell system with internal manifolds and an auxiliary control unit is reported. The system, while operating under ambient conditions, delivers a peak power of 40 W with about 2 W to run the auxiliary control unit. A critical cause and effect analysis, on the data for single cells and stack, suggests the optimum concentrations of fuel and oxidant to be 8 wt. % NaBH4 and 2 M H2O2, respectively in extending the operating time of the system. Such a fuel cell system is ideally suited for submersible and aerospace applications where anaerobic conditions prevail.
منابع مشابه
A direct borohydride—Acid peroxide fuel cell
A fuel cell operating with aqueous sodium borohydride and hydrogen peroxide streams, with one, two and four cells (electrode area 64, 128 nd 256 cm2) connected in a bipolar mode in a filterpress flow cell is reported. The oxidation of borohydride ion was carried out on Au/C particles upported on a carbon felt electrode while the reduction of hydrogen peroxide was carried out on carbon supported...
متن کاملPalladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell
Palladium nanoparticles supported on carbon black powder (Vulcan XC-72) nanocomposite (Pd/C) are synthesized as the catalyst for the anodic oxidation of glucose for use in a direct glucose alkaline fuel cell (DGAFC). Characterization of the catalyst is carried out using physical and electrochemical methods. It is observed that Palladium nanoparticles are uniformly dispersed onto the carbon blac...
متن کاملA direct methanolehydrogen peroxide fuel cell with a Prussian Blue cathode
In this work, a direct methanolehydrogen peroxide fuel cell is developed and tested. Theoretically, it is shown that the use of hydrogen peroxide in a direct methanol fuel cell (DMFC) not only increases the cell's voltage from 1.21 V to 1.76 V, but also reduces the activation loss of the reduction reaction as a result of two-electron transfer. Experimentally, it is demonstrated that the fuel ce...
متن کاملAnion- or Cation-Exchange Membranes for NaBH4/H2O2 Fuel Cells?
Direct borohydride fuel cells (DBFC), which operate on sodium borohydride (NaBH4) as the fuel, and hydrogen peroxide (H2O2) as the oxidant, are receiving increasing attention. This is due to their promising use as power sources for space and underwater applications, where air is not available and gas storage poses obvious problems. One key factor to improve the performance of DBFCs concerns the...
متن کاملMicro reactor integrated μ-PEM fuel cell system: a feed connector and flow field free approach
A system level microreactor concept for hydrogen generation with Sodium Borohydride (NaBH4) is demonstrated. The uniqueness of the system is the transport and distribution feature of fuel (hydrogen) to the anode of the fuel cell without any external feed connectors and flow fields. The approach here is to use palladium film instead of feed connectors and the flow fields; palladium’s property to...
متن کامل