3D micro-optic circuits in holographic photopolymers
نویسندگان
چکیده
Three-dimensional direct-write lithography into diffusion-mediated photopolymers developed for holography is shown to create 10 micron single-mode waveguides. We demonstrate low-loss waveguides, 90 degree bends off of encapsulated mirrors and fabrication of waveguides to embedded fibers. ©2007 Optical Society of America OCIS codes: (160.5470) Polymers, (160.2900) Holographic recording materials, (130.3130) Integrated optics materials, (130.6750) Integrated optics systems, (130.2790) Integrated optics guided waves
منابع مشابه
Hybrid Integrated Optics in Volume Holographic Photopolymer
Traditional planar lightwave circuits fabricated from lithographically-patterned waveguides in glasses, semi-conductors or polymers cannot accommodate the wide range of materials required by typical optical devices. In addition, such waveguides are nearly always defined in the material surface and thus can support only a limited density of interconnects and suffer poor performance at waveguide ...
متن کاملjp 3 D waveguides with fiber couplers and 90 degree bends in holographic photopolymer
Two active areas of research in the field of integrated optics are the coupling of on-chip waveguides to off-chip optical fibers and the reduction of circuit size which is dominated by the minimum bend radius of waveguides. Traditional approaches using mask-based lithography involve the complex etching of micro-mechanical on-chip mounts for the fiber or total-internal-reflection facets for shar...
متن کامل3 Dimensional analysis of holographic photopolymers based memories.
One of the most interesting applications of photopolymers is as holographic recording materials for holographic memories. One of the basic requirements for this application is that the recording material thickness must be 500 microm or thicker. In recent years many 2-dimensional models have been proposed for the analysis of photopolymers. Good agreement between theoretical simulations and exper...
متن کاملFabrication of 3D Micro- and Nano-Structures by Prism-Assisted UV and Holographic Lithography
Lithography, the fundamental fabrication process of semiconductor devices, is playing a critical role nowadays in the fabrication of microand nano-structures especially for the realization of micro-electro-mechanical systems (MEMS), microfluidic devices, photonic crystals, photonic integrated circuits, micro-optics, and plasmonic optoelectronic devices. These devices have various practical appl...
متن کاملPhase and Absorption Metrology for Thick Photopolymer Devices
Studies of development kinetics in volume photopolymers typically use transmission holography to quantify the index distribution. This method has advantages including simplicity, quantitative index data and natural mapping onto theories using harmonic expansion of the material response. A particular disadvantage is that the low spatialfrequency response corresponding to the intensity of the wri...
متن کامل