Modification of SnO2 Nanowires with TeO2 Branches and Their Enhanced Gas Sensing
نویسندگان
چکیده
We prepared a highly sensitive and selective NO2 sensor, based on the TeO2 branched SnO2 nanowires (NWs), in terms of vapor-liquid-solid method, with subsequent growing of branches on the stems of SnO2 NWs. Fabricated sensors showed a high response higher than 10 to 10 ppm of NO2 gas at 100 °C. We investigated the associated sensing mechanisms, with respect to the enhancement of sensing behaviors by the addition of TeO2 branches. Based on the results obtained in this work, we believe that the present sensor with an efficient fabrication technique, and high sensitivity and selectivity can be used for detection of NO2 gas in real applications.
منابع مشابه
Improving Gas Sensing Properties of Tin Oxide Nanowires Palladium-Coated Using a Low Cost Technique
Thin films of SnO2 nanowires were successfully prepared by using chemical vapor deposition (CVD) process on quartz substrates. Afterwards, a thin layer of palladium (Pd) as a catalyst was coated on top of nanowires. For the deposition of Pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors...
متن کاملEnhanced Ethanol Gas Sensing Properties of SnO2-Core/ZnO-Shell Nanostructures
An inexpensive single-step carbon-assisted thermal evaporation method for the growth of SnO2-core/ZnO-shell nanostructures is described, and the ethanol sensing properties are presented. The structure and phases of the grown nanostructures are investigated by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) techniques. XRD a...
متن کاملMorphology Control of Tin Oxide Nanostructures and Sensing Performances for Acetylene Detection
Morphology Control plays an important role in gas sensing properties of metal oxide semiconductor based gas sensors. In this study, various morphologies of SnO2 nanostructures including nanobulks, nanospheres, nanorods, and nanowires were successfully synthesized via a simple hydrothermal method assisted with different surfactants. X-ray powder diffraction and scanning electron microscopy were ...
متن کاملConstruction of 1D SnO2-coated ZnO nanowire heterojunction for their improved n-butylamine sensing performances
One-dimensional (1D) SnO2-coated ZnO nanowire (SnO2/ZnO NW) N-N heterojunctions were successfully constructed by an effective solvothermal treatment followed with calcination at 400 °C. The obtained samples were characterized by means of XRD, SEM, TEM, Scanning TEM coupled with EDS and XPS analysis, which confirmed that the outer layers of N-type SnO2 nanoparticles (avg. 4 nm) were uniformly di...
متن کاملSynthesis of SnO2 Nanowires their Structural and H2 Gas Sensing Properties
SnO2 nanowires were prepared on bare oxidized silicon, Au and SnO2 coated substrates by thermal evaporation of tin grains in argon atmosphere at 900°C. X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM) were used to characterize the SnO2 nanowires. FE-SEM images indicated that the size of SnO2 nanowires depend on the type of substrate. Gas sensor was fabricated by ...
متن کامل