Design of a generic five-axis postprocessor based on generalized kinematics model of machine tool
نویسندگان
چکیده
This paper presents a generic five-axis postprocessor system for various five-axis machine tools. The generalized kinematics model of common five-axis machines is constructed by combining two rotational degrees of freedom on the fixture table and two rotational degrees of freedom on the spindle. The complete analytical equations for NC data are obtained through homogeneous coordinate transformation matrix and inverse kinematics. The derived five-axis NC code expression is a general form suitable for all kinds of five-axis machine tools with three orthogonal linear axes and two orthogonal rotational axes. A window-based postprocessor software written by Borland C++ Builder and OpenGL has been developed according to the presented algorithm. The wireframe model of the configured five-axis machine tool can be promptly shown and rotated/zoomed dynamically on the screen to assist the user to input relevant parameters correctly and efficiently. Through the implementation of the developed postprocessor and the verification by the solid cutting simulation software as well as the real machining experiment, the effectiveness of the proposed scheme was confirmed. r 2006 Elsevier Ltd. All rights reserved.
منابع مشابه
Machine models and tool motions for simulating five-axis machining
This paper presents a method of determining the tool motion of a five-axis machine. The method is motivated by the imprint point method, where points on the machined surface are computed based on the tool position and tool motion. While simple linear motion can be used as a coarse approximation to this motion, this paper looks at more accurate models of tool motion based on machine kinematics t...
متن کاملA generalized on-line estimation and control of five-axis contouring errors of CNC machine tools
Nonlinear and configuration-dependent five-axis kinematics make contouring errors difficult to estimate and control in real time. This paper proposes a generalized method for the on-line estimation and control of five-axis contouring errors. First, a generalized Jacobian function is derived based on screw theory in order to synchronize the motions of linear and rotary drives. The contouring err...
متن کاملKinematic Modelling of Hybrid Parallel- Serial Five-Axis Machine Tool
Compared with serial structured machine tools and robots, parallel kinematic machine tools and robots have many advantages. Many different topologies of parallel mechanisms with 3-6 DOF have been used. Considering that some limitations are indeed due to the use of parallel mechanisms, it is appealing to investigate architectures based on hybrid arrangements where serial and parallel concepts ar...
متن کاملA novel 2-DOF parallel mechanism based design of a new 5-axis hybrid machine tool
In this paper, the concept of a new 5-axis hybrid machine tool is proposed. The machine is a tool being with both parallel and serial structures, which is based on a novel 2-DOF parallel platform and serial orientations. The machine tool has advantages in terms of high stiffness, high dexterity, high speed, and being capable of long components manufacturing. The kinematics characteristics, such...
متن کاملEfficient Web-Learning Collision Detection Tool on Five-Axis Machine
As networking has become popular, Web-learning tends to be a trend while designing a tool. Moreover, five-axis machining has been widely used in industry recently; however, it has potential axial table colliding problems. Thus this paper aims at proposing an efficient web-learning collision detection tool on five-axis machining. However, collision detection consumes heavy resource that few devi...
متن کامل