Trajectory Research about the Rolling-Pin Belt Transmission
نویسندگان
چکیده
A new belt transmission mechanism, having the function of no-slip driving, is described in the paper. It is composed of pulleys with carved rails and belt with rolled pins spaced out on both sides. Firstly, the trajectory curve is deduced along which pins embedded in the pulley. And then, parametric relationships are established, which are about center offsets of two pulleys, working radius of each pulley, the number of meshing curves on every pulley and the number of pins on the belt. All of those provide a theoretical basis for the design of this type of no-slip belt transmission mechanisms.
منابع مشابه
Pin design for part feeding
We consider a sensorless approach to feeding parts on a conveyor belt using pins (rigid barriers) to topple parts into desired orientations. Given the n-sided 2D convex projection of an extruded polygonal part, its center of mass (COM), and coefficients of friction, we develop an O(n) algorithm to compute the toppling graph, a new data structure that represents the mechanics of toppling includi...
متن کاملThe Effect of Cross-Rolling Process on Nanostructure of Al 1050 Alloy
The cross-rolling is a new process that results in significant evolutions in microstructure of the metallic sheets. In this study, an aluminium 1050 sheet was rolled up to 95% reduction in cross directions for ten passes. The rolled samples were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The rolled samples possess a high dislocation density and ultra-fin...
متن کاملAn Improved Dispatching Method (a-HPDB) for Automated Material Handling System with Active Rolling Belt for 450 mm Wafer Fabrication
The semiconductor industry is facing the transition from 300 mm to 450 mm wafer fabrication. Due to the increased size and weight, 450 mm wafers will pose unprecedented challenges on semiconductor wafer fabrication. To better handle and transport 450 mm wafers, an advanced Automated Material Handling System (AMHS) is definitely required. Though conveyor-based AMHS is expected to be suitable for...
متن کاملResearch Report RIKEN-BMC #003 Whole Body Manipulation Part III: On The Rolling Contact Problem
1 2-link whole arm manipulation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Zero-input motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Evolution of φ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Trajectory tracking control in the case of rolling contact with L...
متن کاملAnalysis Of Existing Rolling Mill With Prototype Soft Starting Arrangement Of Rolling Mill For Energy Conservation – An Experimental Approach
In this paper an analysis is done on the main drive of rolling mill which consumes about 60 to 70 % of total energy of the plant. The existing rolling mill in India are using the 3 phase induction motor and flywheel to drive the rolling mill. The electric motor transmits the power to flywheel with the help of V-belt. An attempt has made after analysis of existing mill that by using some soft st...
متن کامل