An Inverse Method to Estimate the Acoustic Impedance on the Surfaces of Complex-shaped Interiors
نویسندگان
چکیده
Gabriel Pablo Nava1,3,∗, Yosuke Yasuda, Yoichi Sato and Shinichi Sakamoto 1Institute of Industrial Science, University of Tokyo, Komaba 4–6–1, Meguro-ku, Tokyo, 153–8505, JAPAN. 2Graduate School of Frontier Science, University of Tokyo, Kashiwanoha 5–1–5, Kashiwa-shi, Chiba, 277–8563, JAPAN. 3NTT Communication Science Laboratories, NTT Co. Hikaridai 2–4, Seika-cho, Keihana Science City, Kyoto, 619–0237 JAPAN. ∗Email: [email protected]
منابع مشابه
In situ estimation of acoustic impedance on the surfaces of realistic interiors: an inverse approach
In situ measurement of acoustic impedance is traditionally performed using pairs of microphones located close to the test surface. However, this method becomes troublesome if inaccessible complex-shaped surfaces, such as those in a real room, are considered. To overcome this problem a method to estimate the normal acoustic impedance on the interior surfaces of a room is proposed. As input data,...
متن کاملEstimating surface acoustic impedance with the inverse method.
Sound field parameters are predicted with numerical methods in sound control systems, in acoustic designs of building and in sound field simulations. Those methods define the acoustic properties of surfaces, such as sound absorption coefficients or acoustic impedance, to determine boundary conditions. Several in situ measurement techniques were developed; one of them uses 2 microphones to measu...
متن کاملAn inverse method for in-situ estimation of acoustic surface impedance targeting inverse sounr rendering in rooms
We propose two methods based on the inverse boundary element method (IBEM) for the estimation of acoustic impedances of the interior surfaces of a room. The algorithms take as input the geometrical model of the space, a set of sound field pressures measured at random points and the vibration strength of the sound source. A first approach is a constrained leastsquares method that attempts to fin...
متن کاملStudy of the Frictional Surface Damage Using Acoustic Emission Method
In this study, the change at rubbing surfaces has been investigated experimentally using an acoustic emission signal monitoring system. A steel ring is slipped on the surface of a metallic sheet to simulate frictional conditions. The mechanical disturbances caused by the movement of the ring produce stress waves propagating along the sheet surface. The out of plane displacement of the sheet su...
متن کاملScanning impedance microscopy (SIM): A novel approach for AC transport imaging
Scanning Impedance Microscopy (SIM) is one of the novel scanning probe microscopy (SPM) techniques, which has been developed to taking image from sample surface, providing quantitative information with high lateral resolution on the interface capacitance, and investigating the local capacitance–voltage (C–V) behavior of the interface and AC transport properties. The SIM is an ordinary AFM equip...
متن کامل