Conductive Ink Usage Optimization Using Grid Designs for Inkjet Printed Epidermal RFID
نویسنده
چکیده
Techniques to reduce the amount of conductive inks used for the inkjet printing of body mounted RFID tattoo tags are presented in this work. Different grid thicknesses and separation distances are investigated. The performances of the different tags are evaluated based on measured read range.
منابع مشابه
Performance Comparison of Inkjet and Thermal Transfer Printed Passive UHF RFID Tags
We compare the maximum read range of passive ultra high frequency (UHF) radio frequency identification (RFID) tags that have been produced using different metal printing techniques, specifically inkjet printing and thermal transfer printing. We used the same substrate (THERMLfilm), antenna designs, and electronic circuitry in our comparison so as to isolate the effect of the metal printing. Due...
متن کاملWater Fast of Inkjet Print by Using Acrylic /Nano-Silver Ink
A colour ink jet printing with improved water fastness property was produced by using of special component in the ink’s formulation. In this study, the water fastness of ink jet prints which used acrylic/nano-silver resin nano-composite ink instead of conventional resin in ink’s formulation was examined. The nano composite resin was prepared via miniemulsion polymerization of acrylate monomers ...
متن کاملMetal-based Inkjet Inks for Printed Electronics
A review on applications of metal-based inkjet inks for printed electronics with a particular focus on inks containing metal nanoparticles, complexes and metallo-organic compounds. The review describes the preparation of such inks and obtaining conductive patterns by using various sintering methods: thermal, photonic, microwave, plasma, electrical, and chemically triggered. Various applications...
متن کاملPerformance comparison of inkjet and thermal transfer printed passive ultra-high-frequency radio-frequency identification tags
We compare the maximum read range of passive ultra high frequency (UHF) radio frequency identification (RFID) tags that have been produced using different metal printing techniques, specifically inkjet printing and thermal transfer printing. We used the same substrate (THERMLfilm), antenna designs, and electronic circuitry in our comparison so as to isolate the effect of the metal printing. Due...
متن کاملInkjet printed flexible antenna on textile for wearable applications
We report a direct write inkjet printing technique for fabricating a flexible antenna on textile for use in smart textile applications such as wearable systems (Rienzo et al. 2006). The complete antenna was deposited entirely using inkjet printing. The inkjet printed antenna is based on a half wavelength dipole antenna offering a planar structure and acceptable size. The printable silver nanopa...
متن کامل