Backstepping and flatness approaches for stabilization of the stick-slip phenomenon for drilling
نویسندگان
چکیده
In this article, we propose control solutions to suppress undesirable torsional oscillations of the drill string in oil well drilling systems. Two feedback control laws are derived from Partial Differential Equations (PDE) models capturing the main features of the so-called stick-slip phenomenon. Comparative simulations highlight the merits of the two approaches.
منابع مشابه
Control of a Hyperchaotic System Via Generalized Backstepping Method
This paper investigates on control and stabilization of a new hyperchaotic system. The hyperchaotic system is stabilized using a new technique which called Generalized Backstepping Method (GBM). Because of its similarity to Backstepping approach, this method is called GBM. But, this method is more applicable in comparison with conventional Backstepping. Backstepping method is used only for sy...
متن کاملFlatness and stick-slip stabilization
The origin of this report lies in the very interesting discussions with Chal-lamel of the CGES at Ecole des Mines de Paris and with Hugues Mounier of Ecole des Mines de Nantes.
متن کاملRotary Steerable Directional Drilling Stick/Slip Mitigation Control
This paper details the online-identification-based adaptive design of a stick/slip minimization algorithm and top-drive servo control for Rotary Steerable System (RSS) directional drilling tools. Stick/slip in this context refers to the downhole angular velocity variation of the bit about a nominal value. The basic pole placement controller designs are SISO linear but recursively evaluated base...
متن کاملTime-Varying Sliding Mode Adaptive Control for Rotary Drilling System
This paper presents a time-varying sliding mode adaptive controller in order to handle the stick-slip oscillation of nonlinear rotary drilling system. The time-varying sliding mode controller with strong robust has two time-varying sliding surfaces, one of them induced time-varying integral sliding mode control can control the transient stage of the rotary drilling system and ensure the system ...
متن کاملModelling and Analysis of Stick-slip Behaviour in a Drillstring under Dry Friction
Stick-slip vibrations present at the bottom hole assembly (BHA) of a generic oilwell drillstring subject to dry friction are studied. Different nonlinear differential equations-based models of a drillstring are analyzed. The drillstring models presented are oriented to avoid simulation problems due to the discontinuities originated by the presence of dry friction. The influence of different dri...
متن کامل