Ultrasonic deagglomeration of AI2O3 and BaTiO3 for tape casting
نویسندگان
چکیده
Ultrasonic agitation is a very efficient method for deagglomeration and dispersion of ceramic slurries (alumina and barium titanate). The influence of parameters such as acoustic power, temperature, and treatment duration on the dispersion efficiency has been studied. For
منابع مشابه
Ethanol-based Tape Casting Process of the Textured Bi0.5(Na0.80K0.20)0.5TiO3-BiFeO3 Ceramics
The rheological and tape casting behavior of ethanol-based Bi0.5(Na0.80K0.20)0.5TiO3-7 mol% BiFeO3 (BNKT-BF) slurries was investigated. The effect of sintering temperature profile on texture development with a preferred orientation was also studied. A 50 MPa pressure assisted three step sintering profile promoted extensive texture development together with densification. The role of BF as a sin...
متن کاملInvestigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting
In this study various yttria doped zirconia based thin films were prepared by the aqueous tape casting method. The rheological property of the paste was studies. The phase content and microstructure of the samples was investigated by X-ray diffraction and scanning electron microscope, respectively. The mechanical properties of thin films were studied by Vickers microhardness and nanoindentatio...
متن کاملTAPE CASTING OF NON-AQUEOUS HYDROXYAPATITE SLIPS
Thin sheets of hydroxyapatite were fabricated by tape casting process. The non-aqueoustape casting formulation was optimized by adjusting the concentration of organic additivesspecially those of binder and plasticizer in the slurry. The optimized slurry was cast on a glasscarrier using a designed laboratory scale doctor blade. Following a binder removal stage, thetapes were sintered at differen...
متن کاملThe Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell
Using flawless components are important for a proper material selection and best working conditions to achieve the best performance of solid oxide fuel cells (SOFCs). Tape casting is the most used process for the fabrication of SOFC parts, especially anode and electrolyte due to its advantages regarding the other processes. In this study, the effect of slurry composition and milling time were s...
متن کاملEnhanced ferroelectric-nanocrystal-based hybrid photocatalysis by ultrasonic-wave-generated piezophototronic effect.
An electric field built inside a crystal was proposed to enhance photoinduced carrier separation for improving photocatalytic property of semiconductor photocatalysts. However, a static built-in electric field can easily be saturated by the free carriers due to electrostatic screening, and the enhancement of photocatalysis, thus, is halted. To overcome this problem, here, we propose sonophotoca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016