The Application of the Doppler Shifted Dispersion Relationship to Hurricane Wave Data from an ADCP Directional Wave Gauge and Co-Located Pressure Sensor
نویسندگان
چکیده
Waves from hurricanes Lili and Isidore were measured using an ADCP directional wave gauge and an independent pressure sensor. The array is part of Louisiana State University’s WAVCIS ocean observing system located in the northern Gulf of Mexico. Data demonstrate the effects of strong storm surge induced currents on wavenumber. We investigate the effect of Doppler shifting of wavenumber to wave height estimates and wave direction. Comparison data are used from direct surface measurement and a co-located PUV sensor to show the extent of errors introduced by currents. The importance of accurately measuring wave heights during extreme events underscores the value of addressing significant error sources associated with storm surge.
منابع مشابه
Dispersion of Torsional Surface Wave in a Pre-Stressed Heterogeneous Layer Sandwiched Between Anisotropic Porous Half-Spaces Under Gravity
The study of surface waves in a layered media has their viable application in geophysical prospecting. This paper presents an analytical study on the dispersion of torsional surface wave in a pre-stressed heterogeneous layer sandwiched between a pre-stressed anisotropic porous semi-infinite medium and gravitating anisotropic porous half-space. The non-homogeneity within the intermediate layer a...
متن کاملAn Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams
This paper introduces an optical measurement system for shock wave characteristics. The system works by mountinga metal plate attached to spring mounts against the shock wavefront. This set is sealed and can plot the shock wave pressure diagram by measuring plate's displacement, radiation and changing the reflection of light during shock wave conflict, and converting these optical data to volta...
متن کاملMeasuring Waves and Currents with an Upward-Looking ADCP
Routine monitoring of waves and currents in the nearshore region is of great interest both scientifically and to the general public because of their role in coastline erosion and their impact on recreational activities. Historically, the technology for measuring these quantitites has been distinct, requiring separate instrumentation for each. In this contribution we show that it is possible in ...
متن کاملApplication of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification
A Lamb wave-based crack detection method for aluminum plates health monitoring is developed in this paper. Piezoelectric disks are employed to actuate and capture the Lamb wave signals. The position of crack is assumed to be aligned with the sensor and actuator. Extraction of high quality experimental results of lamb wave propagation in a plate-like structure is considerably complicated due to...
متن کاملTiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کامل