Photovoltaic Based Three-Phase Three-Wire DSTATCOM to improve Power Quality
نویسندگان
چکیده
Three-phase three-wire Distribution Static Compensator (DSTATCOM) with Photovoltaic (PV) array or battery operated DC-DC boost converter is proposed in this paper. The proposed DSTATCOM consists of a three-leg Voltage Source Converter (VSC) with a DC bus capacitor and it provides continuous reactive power compensation, source harmonic reduction and load compensation throughout the day. With the help of PV array or battery, which is connected to the dc link of VSC via the DC-DC boost converter is used to maintain the desired voltage to the dc bus capacitor for continuous compensation to the load. The IcosΦ controlling algorithm is proposed for three-phase three-wire DSTATCOM. In this algorithm, the fuzzy logic controller is compared with the conventional PI (Proportional Integral) controller at DC bus to regulate the DC link capacitor voltage. The fuzzy controller is used to maintain the DC link voltage to the reference value. The switching of VSC will occur by Hysteresis based Pulse Width Modulation (PWM) current controller. The simulations are carried out by using MATLAB/simulink software to demonstrate the effectiveness of the proposed scheme.
منابع مشابه
Comparative Power Quality Analysis of Different DSTATCOM Topologies
This paper presents the three topologies of three-phase four-wire DSTATCOM for reduction of harmonics, reactive power compensation, increasing power factor, which occur due to a nonlinear load, environment problem and polluted grid. The performances of the above topologies have been compared for the magnitude of source current, power factor improvement, DC-link voltage regulation, and total har...
متن کاملNeuro-fuzzy Based Power Quality Improvements in a Three Phase Four Wire Distribution System Using Dstatcom Neuro-fuzzy Based Power Quality Improvements in a Three Phase Four Wire Distribution System Using Dstatcom
This project presents reactive power compensation in a distribution power system. DSTATCOM (distribution static compensator) is a reactive power compensator for power quality improvement in a three phase four wire distribution system. A voltage source converter (VSC) based DSTATCOM with a zig-zag transformer is used for the compensation of reactive power for voltage regulation along with load b...
متن کاملPower Quality Enhancement Using VSC Based DSTATCOM
In this paper, a new three-phase four-wire distribution static compensator (DSTATCOM) based on a T-connected transformer and a three-leg voltage source converter (VSC) is proposed for power quality improvement. The T-connected transformer connection mitigates the neutral current and the three-leg VSC compensates harmonic current, reactive power, and balances the load. Two single-phase transform...
متن کاملPower Quality Improvement of Three-phase four-wire DSTATCOM with Fuzzy logic Controller
The topology and control of three-phase 4-wire DSTATCOM consisting of a operating flexibility in the DSTATCOM consisting of a operating flexibly in the voltage or current control mode. In the voltage control DSTATCOM topology includes three single-phase voltage source converters connected in parallel. The proposed DSTATCOM provides the voltage regulation of power factor correction along with ha...
متن کاملSimulation of Three-Leg VSC based Dstatcom for Power Quality Improvement
The distribution systems are facing severe power quality problems due to the large number of three phase and single phase linear, non-linear loads. These loads may be supplied from three-phase ac mains with neutral conductor. This creates excessive neutral current, high reactive power and harmonic current burden, load unbalancing, poor voltage regulation, etc. A three-phase fourwire distributio...
متن کامل