Material Characterization of High Dielectric Constant Polymer–ceramic Composite for Embedded Capacitor to Rf Application
نویسندگان
چکیده
Embedded capacitor technology can improve electrical performance and reduce assembly cost compared with traditional discrete capacitor technology. Polymer–ceramic composites have been of great interest as embedded capacitor material because they combine the processability of polymers with the desired electrical properties of ceramics. A novel nano-structure polymer–ceramic composite with very high dielectric constant (er 150, a new record for the highest reported er value of nano-composite) has been developed in our previous work. RF application of embedded capacitors requires that insulating material have high dielectric constant at high frequency (GHz), low leakage current, high breakdown voltage and high reliability. A set of electrical tests have been conducted in this work to characterize the properties of the in house developed novel high dielectric constant polymer–ceramic nano-composite. Results show that this material has faily high dielectric constant in the RF range, low electrical leakage and high breakdown voltage. 85=85 TH aging test has been performed and it had shown this novel high K material has good reliability. An embedded capacitor prototype with capacitance density of 35 nF=cm has been manufactured using this nano-composite with spinning coating technology. This novel nano-composite can be used for the integral capacitors in the RF applications.
منابع مشابه
Flexible Ceramic-Polymer Composite Substrates with Spatially Variable Dielectrics for Miniaturized RF Applications
متن کامل
Fibers for Textile - Based Electrical Energy Storage
This research will demonstrate feasibility for manufacturing fiber-based ceramic capacitors suitable for electrical energy storage within multifunctional textile products. Capacitive energy storage is well matched to applications requiring high specific power, long cycle life, and high reliability. We are using a simple chemical scheme for preparing fiber-based capacitors by coating electricall...
متن کاملMechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber
Effective elastic properties for carbon nanotube reinforced composites are obtained through a variety of micromechanics techniques. An embedded carbon nanotube in a polymer matrix and its surrounding interphase is replaced with an equivalent fiber for predicting the mechanical properties of the carbon nanotube/polymer composite. The effects of an interphase layer between the nan...
متن کاملMechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber
Effective elastic properties for carbon nanotube reinforced composites are obtained through a variety of micromechanics techniques. An embedded carbon nanotube in a polymer matrix and its surrounding interphase is replaced with an equivalent fiber for predicting the mechanical properties of the carbon nanotube/polymer composite. The effects of an interphase layer between the nan...
متن کاملHigh Efficiency Electrolyte Lithium Battery and RF Characterization
The dielectric properties and ionic conductivity of novel "ceramic state" polymer electrolytes for high capacity lithium battery are characterized by Radio frequency and Microwave methods in two broad frequency ranges from 50 Hz to 20 KHz and 4 GHz to 40 GHz. This innovative solid polymer electrolyte which is highly ionic conductive (10 S/cm at room temperature) from -40C to +150C can be used i...
متن کامل