3D Pendulum Swinging Control by an Industrial Robot Manipulator
نویسندگان
چکیده
In this paper a pendulum of two degrees of freedom is investigated, i.e. a spherical pendulum which is attached to the end effector of an industrial robot manipulator. The result of the presented research is a controllable transport of the pendulum in all three dimensions. That means a real time control of the pendulum during all the time of the transport and a stable reaction of suddenly changing circumstances. The mathematical model has been derived due to the Lagrangian mechanics without consideration of the external forces. The position of the pendulum is observed with an USB camera which is also attached to the end effector and follows the motion of the manipulator. The analysis of the pictures taken by the USB camera provides an estimation of the current position of the pendulum and builds the input of the controller. For the first the experimental setup, the mathematical model and the controller are explained and then some experimental results are presented.
منابع مشابه
Tracking a Swinging Target with a Robot Manipulator using Visual Sensing
In this paper we develop a method for loading parts onto a swinging target using an industrial robot. The orientation of the target is estimated by a particle filter using camera images as measurements. Robust and accurate tracking is achieved by using an accurate dynamic model of the target. The dynamical model is also used to compensate for the time delay between the acquisition of images and...
متن کاملadaptive control of two-link robot manipulator based on the feedback linearization method and the proposed neural network
This paper proposes an adaptive control method based on the feedback linearization technique and a proposed neural network, for tracking and position control of an industrial manipulator. At first, it is assumed that the dynamics of the system are known and the control signal is constructed by the feedback linearization method. Then to eliminate the effects of the uncertainties and external d...
متن کاملDesigning Robust Finite-Time Nonlinear Torques for a n-DOF Robot Manipulator with Uncertainties, Sector and Dead-Zone Input Nonlinearities
In this paper, a complete dynamical model is presented for an uncertain -DOF robot manipulator containing description of sector and dead-zone input nonlinearities. Next, robust finite-time tracking problem of desired trajectories is declared and formulated for the aforementioned robot manipulator. By defining innovative nonlinear sliding manifolds and developing the nonsingular terminal sliding...
متن کاملMINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کاملPath Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is one of the popular methods of steel production from steel scraps. The plasma arc is used in EAF to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal is drained from the EAF through the tap hole. Nowadays, it is critical to use Automated/robotic tools for opening the tap hole with oxygen lancing. Because many workers have been blinde...
متن کامل