Estimating Flow Rate Using the Motor Torque in a Rotary Blood Pump

نویسندگان

  • Wataru Hijikata
  • Jun Rao
  • Shodai Abe
  • Setsuo Takatani
  • Tadahiko Shinshi
چکیده

Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan 1Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8503, Japan 2Division of Research and Development, MedTech Heart Inc., 3-24-8 Asakusabashi, Taito-ku, Tokyo 111-0053, Japan 3School of Medicine, Nihon University, 30-1 Ooyaguchikami-cho, Itabashi-ku, Tokyo 173-8610, Japan

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Noninvasive Flow Estimation of a Rotary Ventricular Assist Device

An estimator identifying the flow rate through a rotary blood pump was developed. This estimation algorithm uses the pump current and speed signals to estimate the blood flow rate through the pump. The algorithm was derived based on the force balance between the electric torque generated by the motor and the load torque, including the mechanical losses. The corresponding estimator parameters we...

متن کامل

The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition

The performance of the electric submersible pump (ESP) significantly affected by Gas Void Fraction (GVF). Thus, using of a Rotary Gas Separator (RGS) is a suitable solution for this issue. The performance of the RGS is function of different parameters such as geometry of impeller, rotating speed, boundary conditions, media viscosity and GVF. In this study, the influences of GVF, viscosity, ...

متن کامل

The parametric study of an electrical submersible pump rotary gas separator under two-phase flow condition

The performance of the electric submersible pump (ESP) significantly affected by Gas Void Fraction (GVF). Thus, using of a Rotary Gas Separator (RGS) is a suitable solution for this issue. The performance of the RGS is function of different parameters such as geometry of impeller, rotating speed, boundary conditions, media viscosity and GVF. In this study, the influences of GVF, viscosity, and ...

متن کامل

An Implantable Ventricular Assist System Employing a Radially Controlled Maglev Centrifugal Blood Pump with Capability to Measure Blood Flow Rate without Additional Sensors

In order to solve the problems of lack of heart donors for transplant, implantable ventricular assist systems (VAS) have been developed to assist the failing heart ventricle. One of the components of a VAS is a blood pump that connects the left ventricle to the aorta. Therefore, the pump flow rate is influenced by the cardio-vascular system. To control the flow rate through the blood pump, real...

متن کامل

Numerical Simulation of Cavitation in Mixed Flow Pump

The purpose of this study is to investigate the performance and three-dimensional behavior of the flow in a mixed flow pump and the way cavitation phenomenon is affected by different parameters such as fluid temperature, pump speed and flow rate. Computational fluid dynamic software FLUENT 6.3 was utilized to simulate the whole flow field of the pump. RNG k-ε model combined with standard wall f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015