Combining inter-source seismic interferometry and source-receiver interferometry for deep local imaging
نویسندگان
چکیده
The virtual source method has been applied successfully to retrieve the impulse response between pairs of receivers in the subsurface. This method is further improved by an updown separation prior to the crosscorrelation to suppress the reflections from the overburden and the free surface. In a reversed situation where the sources are in the subsurface and receivers are on the surface, in principle, one can apply the same logic to retrieve the virtual response between pairs of sources by source-receiver reciprocity, turning the physical borehole sources into virtual receivers. However, since the up-down separation is not applicable on the source side, the simple crosscorrelation of the total fields results in spurious events due to the incomplete receiver coverage around the sources. We show with a numerical example that for this configuration of borehole sources and surface receivers, one can replace such an updown separation at the source side by that of the direct and reflected waves as a first order approximation. This procedure produces the virtual receiver data that is adequate for local imaging below the source depth and is completely independent of the accuracy of the overburden velocity model. We implement this inter-source type of interferometry by multidimensional deconvolution (MDD). Further, if the conventional surface survey data is available, we test the methodology from source-receiver interferometry (SRI) for this reverse configuration with borehole sources to retrieve the virtual receiver data with reflections coming from above, using also only the separation of the direct and reflected waves. By migrating the two sets of virtual receiver data, one can create a local image around the borehole sources in a deep area with better focusing and localization without a sophisticated velocity model.
منابع مشابه
Creating a virtual source inside a medium from reflection data: a stationary-phase analysis
With seismic interferometry a virtual source can be created inside a medium, assuming a receiver is present at the position of the virtual source. Here we discuss a method that creates a virtual source inside a medium from reflection data, without needing a receiver inside the medium. Apart from the reflection data, an estimate of the direct arrivals is required. However, no information about t...
متن کاملFocusing the wavefield inside an unknown 1D medium: Beyond seismic interferometry
With seismic interferometry one can retrieve the response to a virtual source inside an unknown medium, if there is a receiver at the position of the virtual source. Using inverse scattering theory, we demonstrate that, for a 1D medium, the requirement of having an actual receiver inside the medium can be circumvented, going beyond seismic interferometry. In this case, the wavefield can be focu...
متن کاملFocusing inside an unknown medium using reflection data with internal multiples: numerical examples for a laterally-varying velocity model, spatially-extended virtual source, and inaccurate direct arrivals
Seismic interferometry is a technique that allows one to reconstruct the full response from a virtual source inside a medium, assuming a receiver is present at the virtual source location. We describe a method that creates a virtual source inside a medium from reflection data measured at the surface, without needing a receiver inside the medium and, hence, presenting an advantage over seismic i...
متن کاملPhysical and non-physical energy in scattered wave source-receiver interferometry.
Source-receiver interferometry allows Green's functions between sources and receivers to be estimated by means of convolution and cross-correlation of other wavefields. Source-receiver interferometry has been observed to work surprisingly well in practical applications when theoretical requirements (e.g., complete enclosing boundaries of other sources and receivers) are contravened: this paper ...
متن کاملTarget-oriented interferometry: Imaging internal multiples from subsalt VSP data
Seismic interferometry has become a technology of growing interest for imaging borehole seismic data. We demonstrate that interferometry of internal multiples can be used to image targets above a borehole receiver array. By “internal multiples” we refer to all types of waves that scatter multiple times inside the model. These include, for instance, interbed, intra-salt and water-bottom multiple...
متن کامل