Harmonics Mitigation of Industrial Power System Using Passive Filters
نویسندگان
چکیده
With the development of modern industrial technology a large number of non-linear loads are used in power system, which causes harmonic distortion in the power system. At the same time the power quality and safe operation becomes inferior. Therefore mitigation of harmonics is very necessary under the situation. This paper presents the design of two passive filters to reduce the current harmonics produced by nonlinear loads in industrial power system. Matlab /simlink software has been used for the simulation purpose. The results have been obtained with and without installation of filters and then it is observed that after installation of filters harmonics of the current are reduced and power factor is improved.
منابع مشابه
Harmonic Mitigation Using Unified Power Quality Conditioners and Hybrid Active Power Filters
The power quality issues are of great concern now a days. The increasing use of power electronic devices based nonlinear loads deteriorate the quality of power. Power electronic appliances are widely used in industrial, commercial and utility system thus leading to various power quality problems. This leads to harmonics being injected into the distribution system and also reactive power burden....
متن کاملA graph search algorithm: Optimal placement of passive harmonic filters in a power system
The harmonic in distribution systems becomes an important problem due to an increase in nonlinear loads. This paper presents a new approach based on a graph algorithm for optimum placement of passive harmonic filters in a multi-bus system, which suffers from harmonic current sources. The objective of this paper is to minimize the network loss, the cost of the filter and the total harmonic disto...
متن کاملApplication of Passive Harmonic Filters to Mitigate Source Side Current Harmonics in an Ac – Dc - Dc System
A combination of rectifier and DC – DC chopper is useful in feeding DC loads where the DC input to the loads needs to be stepped up or down. Both rectifier and chopper are based on power electronic switches which inject harmonics in the system. This harmonics is an undesirable effect which should be mitigated effectively. For this, passive harmonic filters are used. Passive harmonic filters are...
متن کاملHarmonic Elimination of 25 kV AC Electric Railways Utilizing a New Hybrid Filter Structure
Thyristor rectifiers are widely used in electric railways in order to control the speed. As a consequence of their usage in addition to substantial input lead current, an enormous amount of harmonics is injected into the grid. To avoid such harmonics as well as reactive power compensation, reactive power hybrid filters consisting of active and passive filters are utilized. Regarding different p...
متن کاملComparative Analysis of Filters to Mitigate Harmonics for Power Quality Enhancement
Due to the advancement in power electronic equipments and increase in the usage of non-linear loads in power distribution system, the undesirable harmonics are introduced that degrade the quality of power. Presence of harmonics are always detrimental to power system that results in irreversible failure of electrical components, sometimes apart from frequently known heating issues in it. There a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره abs/1605.06684 شماره
صفحات -
تاریخ انتشار 2012