A 4μW, ADPLL-Based Implantable Amperometric Biosensor in 65nm CMOS

نویسندگان

  • Abhinav Agarwal
  • Albert Gural
  • Manuel Monge
  • Dvin Adalian
  • Samson Chen
  • Axel Scherer
  • Azita Emami
چکیده

This paper presents a fully implantable, wirelessly powered subcutaneous amperometric biosensor. We propose a novel ultra-low power all-digital phase-locked loop (ADPLL) based potentiostat architecture for electrochemical sensing. The system is wirelessly powered by near-field RF coupling of an on-chip antenna to an external coil at 915 MHz. Bi-directional wireless telemetry supports data transmission from the sensor to the external reader (uplink) via backscattering, and reconfiguration of the sensor chip over the RF downlink. The 1.2×1.2 mm2 prototype is fabricated in TSMC 65nm CMOS process. The potentiostat achieves a 100pA sensitivity over a full scale current range of 0-350nA. The total power consumption of the system is 4μW.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A 1.5GHz 0.2psRMS jitter 1.5mW divider-less FBAR ADPLL in 65nm CMOS

This paper presents a low power, low jitter, PVTstable film-bulk acoustic wave resonator (FBAR) based all digital phase-locked loop (ADPLL) in a 65nm CMOS process. We introduce a power-efficient integer-N ADPLL architecture, where the digitally-controlled FBAR oscillator (FBAR DCO) achieves phase-lock to a reference clock without any explicit frequency dividers in the feedback path. The simplif...

متن کامل

A Monotonic Digitally Controlled Oscillator with Self- Calibration in 65nm CMOS Technology

This paper presents a self-calibration circuit to correct the non-monotonic response in the cascading digitally controlled oscillator (DCO). The proposed calibration circuit can solve the non-monotonic problem when the coarse-tuning control code is changed. The proposed DCO implemented with a standard performance 65nm CMOS process can output frequency ranges from 58.7 MHz to 481.6 MHz. And the ...

متن کامل

Reducing the Power Consumption in Flash ADC Using 65nm CMOS Technology

Today, given the extensive use of convertors in industry, reducing the power consumed by these convertors is of great importance. This study presents a new method to reduce consumption power in Flash ADC in 65nm CMOS technology. The simulation results indicate a considerable decrease in power consumption, using the proposed method. The simulations used a frequency of 1 GHZ, resulting in decreas...

متن کامل

‌Reducing the Consumption Power in Flash ADC Using 65nm CMOS Technology

This paper presents a new method to reduce consumption power in flash ADC in 65nm CMOS technology. This method indicates a considerable reduction in consumption power, by removing comparators memories. The simulations used a frequency of 1 GHZ, resulting in decreased consumption power by approximately 90% for different processing corners. In addition, in this paper the proposed method was desig...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017