Nanoparticle-doped polyimide for controlling the pretilt angle of liquid crystals devices.
نویسندگان
چکیده
The pretilt angles of liquid crystal molecules can be controlled by using conventional polyimide (PI) alignment material doped with different concentrations of Polyhedral Oligomeric Silsequioxanes (POSS) nanoparticles, which have been observed to spontaneously induce vertical alignment. The addition of POSS in the homogenous PI changes the surface energy of the alignment layer and generates a variable pretilt angle. Experimental results demonstrate that the pretilt angle thetap is a function of the POSS concentration, and can be tuned continuously over the range of 0 degrees <thetap<90 degrees. The polar anchoring energy of POSS/PI alignment layer is almost constant regardless of the POSS concentration. This technique is very simple and is compatible with methods familiar in the current LCD industry.
منابع مشابه
Controlling the Alignment of Polyimide for Liquid Crystal Devices
Liquid crystal (LC) devices have been popular for use in photonics products, such as displays for mobile phones, televisions and computers. As shown in Fig. 1, a typical LC device consists of a thin LC layer sandwiched between a pair of indium tin oxide (ITO) conducting glass substrates with a cell gap of few micrometers. Polyimide (PI) as a polymeric material characterized by its outstanding m...
متن کاملZenithal alignment of liquid crystal on homeotropic polyimide film irradiated by ion beam
We investigate the pretilt characteristics of a nematic liquid crystal [LC] in terms of ion beam exposure conditions on the homeotropic polyimide alignment layer. The pretilt angle of LCs in the case of high-energy ion beam treatment was decreased considerably almost the same to that of the homogenous alignment layer though we used homeotropic polyimide film at first. Increasing irradiating ene...
متن کاملControl of liquid crystal pretilt angles by using organic/inorganic hybrid interpenetrating networks.
A new photoalignment method of controlling the pretilt angle of liquid crystals (LCs) by using organic/inorganic hybrid interpenetrating polymer networks (IPNs) is proposed and demonstrated. In the hybrid IPN alignment layer system, the competition between poly(vinyl cinnamate) (PVCi) favoring planar alignment and poly(dimethyl siloxane) (PDMS) favoring vertical alignment made it possible to ac...
متن کاملFabrication of Surface-Stabilized Ferroelectric Liquid Crystal Display with Stripe-Shaped Domain Structure
A uniform stripe-shaped domain (SSD) structure was obtained in the initial ferroelectric liquid crystal (FLC) alignment by rubbing the polyimide films doped with silicon naphthalocyanine. Such a surface-stabilized FLC cell exhibits a high contrast ratio and excellent bistability. Atomic force microscope images and pretilt angle measurement results demonstrated that the rubbing-induced polishing...
متن کاملMeasurement of Polar Anchoring Coefficient for Nematic Cell with High Pretilt Angle
A method to determine the surface anchoring energy of a nematic liquid crystal is proposed. The technique implies the measurements of optical retardation of a nematic cell as a function of a strength and direction of the applied magnetic field. It enables one to get both pretilt angle a and anchoring coefficient Wa in the course of the same experiment. As an example, both parameters ~a510.9° an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 18 16 شماره
صفحات -
تاریخ انتشار 2010