Solubilities of Blowing Agent Blends
نویسندگان
چکیده
The solubility of HFC 134a and HFC 152a in polystyrene melt was measured up to 800 psi at 150 C and 190 C. A magnetic suspension balance was used to experimentally measure the apparent solubility. The Simha-Somcynsky (SS) equation of state (EOS) was applied in the multi-components system to estimate the swollen volume. Consequently, the buoyancy compensation can be obtained to determine the solubility of the blowing agent blends in the polymer melt.
منابع مشابه
Manufacture of Aluminum Closed-cell Foam by ARB process using CaCO3 as the blowing agent
Metal porous foams have been eliciting much interest in recent years due to their high capacity of energy absorption. The characteristics of the pores in these materials play an important role on their energy absorption capability and other properties. This study reports the fabrication of aluminum closed-cell foams by accumulative roll-bonding (ARB) technique using calcium carbonate (CaCO3) as...
متن کاملSodium Alginate/Starch Blends Loaded with Ciprofloxacin Hydrochloride as a Floating Drug Delivery System - In Vitro Evaluation
In the present study, Floating Drug Delivery Beads (FDDS) were prepared with sodium alginate/ starch blend as a matrix, sodium hydrogen carbonate as a pore forming agent, methyl cellulose as a binder and barium chloride solution as a hardening agent. In order to prepare the beads with different porosity and morphology the ratio between pore forming agent to polymer blend and ratio of the co...
متن کاملMorphology and Mechanical Properties Investigation of Binary Polymer Blends Based on PP/SEBS and PP/PC
In this study, eight binary blends of polypropylene (PP)/ poly [styrene-b-(ethylene-co butylene)-b-styrene] tri-block copolymer (SEBS) and polypropylene (PP)/ polycarbonate (PC) were produced at different composition through twin screw extruder. The composition of the minor phases was changed to correlate the morphology and mechanical properties of binary blends (PP/PC and PP/SEBS) through ther...
متن کاملFormulation and Evaluation of Paracetamol Syrup Made by Mixed Solvency Concept
Based on the large number experiments on solubilization of poorly watersoluble drugs, the author is of the opinion that hydrotropy is another type of cosolvency and all water soluble substances whether solids, liquids or gases have solubilizing properties. Therefore, aqueous solutions containing small quantities of several water-soluble excipients giving a concentrated solution, may act as a so...
متن کاملWaste Minimization Strategy: Flexible Polyurethane Foam Manufacture
Methylene chloride and CFCs are used as auxiliary blowing agents in the manufacture of flexible polyurethanefoams and are promptly emitted during the manufacturing processes.The concentrationof the auxiliary blowing agent are quite low due to the accepted practice of using large volumes of air to lower the ambient concentration of toxic isocyanates (a key chemical in the urethane reaction seque...
متن کامل