Shock waves in polycrystalline iron.
نویسندگان
چکیده
The propagation of shock waves through polycrystalline iron is explored by large-scale atomistic simulations. For large enough shock strengths the passage of the wave causes the body-centered-cubic phase to transform into a close-packed phase with most structure being isotropic hexagonal-close-packed (hcp) and, depending on shock strength and grain orientation, some fraction of face-centered-cubic (fcc) structure. The simulated shock Hugoniot is compared to experiments. By calculating the extended x-ray absorption fine structure (EXAFS) directly from the atomic configurations, a comparison to experimental EXAFS measurements of nanosecond-laser shocks shows that the experimental data is consistent with such a phase transformation. However, the atomistically simulated EXAFS spectra also show that an experimental distinction between the hcp or fcc phase is not possible based on the spectra alone.
منابع مشابه
Experimental analysis of shock waves turbulence in contractions with rectangular sections
Formation of shock waves has an important role in supercritical flows studies. These waves are often occurring during passage of supercritical flow in the non-prismatic channels. In the present study, the effect of length of contraction wall of open-channel for two different geometries (1.5 m and 0.5 m) and fixed contraction ratio was investigated on hydraulic parameters of shock waves using ex...
متن کاملMeasurement of release wave speed in shockcompressed polycrystalline alumina and aluminum
Values of release wave speed in shock-compressed polycrystalline alumina and aluminum (2024) have been measured to 400 and 260 kbar, respectively. These values, as well as previous data for aluminum and iron, have been compared with fourth-order finite strain extrapolations of the longitudinal sound speed V o. For alumina in the pressure range 200-300 kbar and for a iron and • iron the observed...
متن کاملX-ray diffraction from shock-loaded polycrystals.
X-ray diffraction was demonstrated from shock-compressed polycrystalline metals on nanosecond time scales. Laser ablation was used to induce shock waves in polycrystalline foils of Be, 25-125 microm thick. A second laser pulse was used to generate a plasma x-ray source by irradiation of a Ti foil. The x-ray source was collimated to produce a beam of controllable diameter, which was directed at ...
متن کاملMultiple scattering theory for polycrystalline materials with strong grain anisotropy: theoretical fundamentals and applications
This work is a natural extension of the author’s previous work: “Multiple scattering theory for heterogeneous elastic continua with strong property fluctuation: theoretical fundamentals and applications” (arXiv:1706.09137 [physics.geo-ph]), which established the foundation for developing multiple scattering model for heterogeneous elastic continua with either weak or strong fluctuations in mass...
متن کاملFabrication of High Frequency Electromagnetic Waves Absorber Sheets by Use of Iron Oxide Nanostructures
Background & Objective: The necessity of using wireless communications and the use of electromagnetic waves in today's world is obvious to everyone. Using of these equipment and development of them, although have many benefits but causes some anxiety on the way in which they influence on environment. One of the most effective ways of decreasing the unwanted effects of these waves is using of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 98 13 شماره
صفحات -
تاریخ انتشار 2007