Analog Integrated Circuit Design Techniques for High - Speed Signal Processing in Communications Systems

Analog Integrated Circuit Design Techniques for High-Speed Signal Processing in Communications Systems. (December 2006) David HernandezGarduno, B.S., Universidad Iberoamericana Chair of Advisory Committee: Dr. Jose Silva-Martinez This work presents design techniques for the implementation of high-speed analog integrated circuits for wireless and wireline communications systems. Limitations commonly found in high-speed switched-capacitor (SC) circuits used for intermediate frequency (IF) filters in wireless receivers are explored. A model to analyze the aliasing effects due to periodical non-uniform individual sampling, a technique used in high-Q high-speed SC filters, is presented along with practical expressions that estimate the power of the generated alias components. The results are verified through circuit simulation of a 10.7MHz bandpass SC filter in TSMC 0.35μm CMOS technology. Implications on the use of this technique on the design of IF filters are discussed. To improve the speed at which SC networks can operate, a continuous-time common-mode feedback (CMFB) with reduced loading capacitance is proposed. This increases the achievable gain-bandwidth product (GBW) of fully-differential amplifiers. The performance of the CMFB is demonstrated in the implementation of a second-order 10.7MHz bandpass SC filter and compared with that of an identical filter using the conventional switched-capacitor CMFB (SC-CMFB). The filter using the continuous-time CMFB reduces the error due to finite GBW and slew rate to less than 1% for clock frequencies up to 72MHz while providing a dynamic range of 59dB and a PSRR > 22dB. The design of high-speed transversal equalizers for wireline transceivers requires