Analysis of dielectric loaded surface plasmon waveguide structures: Transfer matrix method for plasmonic devices
نویسندگان
چکیده
Related Articles Terahertz intracavity generation from output coupler consisting of stacked GaP plates Appl. Phys. Lett. 101, 021107 (2012) Operational lifetime improvement of poly(9,9-dioctylfluorene) active waveguides by thermal lamination Appl. Phys. Lett. 101, 013303 (2012) Operational lifetime improvement of poly(9,9-dioctylfluorene) active waveguides by thermal lamination APL: Org. Electron. Photonics 5, 143 (2012) Nanophotonic detection of side-coupled nanomechanical cantilevers Appl. Phys. Lett. 100, 261102 (2012) Pump dependence of the dynamics of quantum dot based waveguide absorbers Appl. Phys. Lett. 100, 241108 (2012)
منابع مشابه
Improving the quality factor of microwave compact resonators by optimizing their geometrical parameters
Related Articles Mapping inter-element coupling in metamaterials: Scaling down to infrared J. Appl. Phys. 111, 094904 (2012) Thermal nonlinearity in silicon microcylindrical resonators Appl. Phys. Lett. 100, 181101 (2012) High-Q silicon optomechanical microdisk resonators at gigahertz frequencies Appl. Phys. Lett. 100, 173116 (2012) Membrane metamaterial resonators with a sharp resonance: A com...
متن کاملNumerical Study of Gain-Assisted Terahertz Hybrid Plasmonic Waveguide
A numerical transfer matrix method (TMM) is applied to investigate hybrid surface plasmon polaritons (HySPPs) waveguide structure, which consists of a high permittivity dielectric fiber separated from a metal surface with a low permittivity dielectric gap. The results obtained from the TMM agree well with those from the finite element method but with a faster calculation speed. As a demonstrati...
متن کاملNanoscale Plasmonic Devices Based onMetal-Dielectric-Metal Stub Resonators
We review some of the recent research activities on plasmonic devices based on metal-dielectric-metal (MDM) stub resonators for manipulating light at the nanoscale. We first introduce slow-light subwavelength plasmonic waveguides based on plasmonic analogues of periodically loaded transmission lines and electromagnetically induced transparency. In both cases, the structures consist of a MDM wav...
متن کاملElectro-optic switching element for dielectric-loaded surface plasmon polariton waveguides
We present three-dimensional numerical modeling of an active electronically controlled switching element for fully-functional plasmonic circuits based on dielectric-loaded surface plasmon polariton waveguides. It has been demonstrated that the transmission of the guided mode through a highly wavelength-selective waveguide ring resonator WRR can be efficiently controlled with very small refracti...
متن کاملPerformance of thermo-optic components based on dielectric-loaded surface plasmon polariton waveguides
Theoretical analysis of thermo-optic (TO) modulation with dielectric-loaded surface plasmon polariton waveguide (DLSPPW) components at telecom wavelength of 1.55 mm is presented with simulations performed using the finite-element method (FEM). The investigated DLSPPW configuration consists of a 1 mm-thick and 1 mm-wide polymer ridge placed on a 50 nm-thin gold stripe and supported by a buffer l...
متن کامل