Development of pneumatic cellular robots forming a mechanical structure
نویسندگان
چکیده
This study deals with group robots forming a mechanical structure. In this paper, we address the concrete motion mechanisms of the robots. Each robot has a cubic shape with pneumatic actuators. It rotates with a corner of the robot as an axis. To realize the movement, we propose two kinds of mechanical devices. One is a stabilization mechanism that the pneumatic actuator stably forms an arched shape. The other one is a rotary selective valve for minimizing pneumatic elements. This paper also reports a demonstration of the pneumatic robots in hardware.
منابع مشابه
Design and Production of a Pneumatic Moving Exciter for Determination of Vibration Behavior of Structures in Variable Frequencies
Determination and analysis of vibration behavior of structures for at least first few natural frequencies and mode shapes needs several sensors to be connected at different non node points and exciting the structure at one point. Other method for determination of first few mode shapes is to excite several points of the structure at once and sensing the response from one point. Both methods nee...
متن کاملControl of Wheeled Mobile Manipulators with Flexible Suspension Considering Wheels Slip Effects
Wheeled mobile manipulators utilize both the locomotion capabilities of the wheeled platform and manipulation capacity of the arm. While the modelling and control of such systems have previously been studied, most of them have considered robots with rigid suspension and their wheels are subject to pure rolling conditions. To relax the aforementioned limiting assumptions, this research addresses...
متن کاملDesign and Experimental Development of a Pneumatic Stiffness Adjustable Foot System for Biped Robots Adaptable to Bumps on the Ground
Walking on rough terrains still remains a challenge that needs to be addressed for biped robots because the unevenness on the ground can easily disrupt the walking stability. This paper proposes a novel foot system with passively adjustable stiffness for biped robots which is adaptable to small-sized bumps on the ground. The robotic foot is developed by attaching eight pneumatic variable stiffn...
متن کاملUsing Compliant Actuators in the Mechanical Design of Robots developed at the VUB
For many robotic applications the actuation is a serious problem for the mechanical design. Typically electrical motors are used with a gearbox and high gain PD control to track precisely desired trajectories. Regarding safety this is not interesting because in case of a collision the total inertia of the robot is felt. Also for energy efficiency stiff actuators are not interesting because no m...
متن کاملParameter Study of GTN Model in a SLM Manufactured Lattice Structure under Compression by Using FEM
This study investigates the effect of material parameters of the Gurson-Tvergaard-Needleman (GTN) model on the failure prediction of cellular structures. The effect of elastic modulus, calibration parameter of GTN model, isotropic hardening, fracture strain, and strut diameter on the load-displacement curve of a lattice structure fabricated by Selective Laser Melting (SLM) has been studied by u...
متن کامل