Study on Insertion Loss of Fiber Fabry-Perot Filters
نویسندگان
چکیده
Fiber Fabry-Perot (FFP) filters have been widely used in optical fiber communications, and insertion loss (IL) is one of its important characteristics. Based on theoretically analysis, factors related to IL were discussed. In order to investigate the IL of different structures, simulations are carried out with finite-difference time-domain (FDTD) algorithm. Comparisons are made between the optimized structure and full-size-mirror FFP filter, and fiber-inserted FFP filter as well. Simulation results demonstrated that the finite-size-mirror structure can confine the mode size of the open resonator, hence reduce the IL of FFP filter.
منابع مشابه
Co-lasing in an electrically tunable erbium-doped fiber laser
Future fiber optic communications systems will utilize wavelength division mutliplexing as a means of transmitting more information over the same number of fibers. A single source capable of generating multiple frequencies simultaneously would be an attractive option for such systems. We report here on an all-fiber, dual-frequency, colasing, widely tunable laser source with the potential for mu...
متن کاملNovel tunable liquid crystal Fabry-Perot filters for Fiber-Optical system
Tunable filters with a wide tunable range that cover the whole C-band , or L-band, or both, have been found wide applications in fiber optical communication system, mainly in three domain: tunable laser, wavelength division multiplexing systems (WDM), and channel monitoring. Due to the growing demand in bit-rate and number of channels in WDM system, tunable narrow band pass filters are required...
متن کاملActive mode-locking of miniature fiber Fabry-Perot laser (FFPL) in a ring cavity
We demonstrate active mode-locking at 10GHz of a 10mm-long fiber Fabry-Perot laser (FFPL) in a ring cavity. We obtained very stable pulse trains without supermode noise. The pulsewidth was about 10ps, which could be shortened to 1.6ps by insertion of highly-nonlinear fiber.
متن کاملDesign, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملDesign of Optical Fiber Fabry-Perot Sensors Based on Intensity and Phase with Parallel Processing
For fiber Fabry-Perot sensor vulnerable to external parameters such as electromagnetic, noise and displacement impact, reducing the problem resilience, research and design new fiber Fabry-Perot sensor with parallel processing capabilities based on the intensity and phase of perception. First, according to various types of external parameters and the degree of interference, established the inten...
متن کامل