Underdamped Second-Order Systems Overshoot Control
نویسنده
چکیده
The paper addresses the problem of decreasing the overshoot for underdamped second-order systems. A new technique to control the overshoot is proposed, which is based on Posicast control and proportional integral and derivative (PID) control, which performs switching between two controllers. The aim is to use open-loop feedforward control to increase tracking performance and PID control to deal with disturbance rejection. It has been shown that the proposed control scheme can have some advantages over the classical approaches without switching capabilities.
منابع مشابه
Design of PI and PID controllers with transient performance specification
Proportional-integral-derivative (PID) controllers are widely used in industrial control systems because of the reduced number of parameters to be tuned. The most popular design technique is the Ziegler–Nichols method, which relies solely on parameters obtained from the plant step response. However, besides being suitable only for systems with monotonic step response, the compensated systems wh...
متن کاملRobust Non-Overshoot Time Responses Using Cascade Sliding Mode-PID Control
Overshoot is a serio us problem in automatic control systems. This paper presents a new method for elimination of the step response overshoot in a conventional PID-controlled system and enhancement of its robustness by cascading a sliding mode controller in the outer loop. The idea is first to use the cascade control principle to model the under-damped system under PID control with a second-ord...
متن کاملF0 Dynamics in Singing: Evidence from the Data of a Baritone Singer
Transitional fundamental frequency (F0) characteristics comprise a crucial part of F0 dynamics in singing. This paper examines the F0 characteristics during the note transition period. An analysis of the singing voice of a professional baritone strongly suggests that asymmetries exist in the mechanisms used for controlling rising and falling. Specifically, the F0 contour in rising transitions c...
متن کاملA New Method for Tuning PID Parameters by Using Clone Selection Algorithm
In order to improve the control performance of PID controller, a new method based on an improved clone selection algorithm (CSA) and the criteria of monotonic fitness function was introduced. Experimental results on 3 typical control systems (second order control system, high order control system, and second order control system) indicated that the proposed method could obtain optimum PID param...
متن کاملOptimal Control Algorithms for Second Order Systems
Proportional Integral Derivative (PID) controllers are widely used in industrial processes for their simplicity and robustness. The main application problems are the tuning of PID parameters to obtain good settling time, rise time and overshoot. The challenge is to improve the timing parameters to achieve optimal control performances. Remarkable findings are obtained through the use of Artifici...
متن کامل