Towards 3d Mapping of Forests: a Comparative Study with First/last Pulse and Full Waveform Lidar Data

نویسندگان

  • J. Reitberger
  • M. Heurich
  • P. Krzystek
  • U. Stilla
چکیده

This paper highlights several approaches to segment and reconstruct trees from LIDAR data and compares the results acquired both from first/last pulse and full waveform data. In a first step, we set up a conventional watershed based segmentation procedure, which robustly interpolates the CHM from the LIDAR data and finds possible stem positions of the tallest trees in the segments calculated from the local maxima of the CHM. Secondly, we combine this segmentation approach with a special stem detection method. Stem positions in the segments of the watershed segmentation are detected by hierarchically clustering points below the crown base height and reconstructing the stems with a robust RANSAC-based adjustment of the stem points. Finally, we implement a new 3D segmentation of single trees using the normalized cut method. This tackles the problem of how to segment small trees below the CHM. Experiments were conducted in the Bavarian Forest National Park with conventional first/last pulse data and full waveform LIDAR data. The first/last pulse data were collected in a flight with the Falcon II system from TopoSys in a leaf-on situation at a point density of 10 points/m. Full waveform data were captured with the Riegl LMS Q-560 system at a point density of 25 points/m (leaf-off and leaf-on) and at a point density of 10 points/m (leaf-on). The study results prove that the new 3D segmentation approach is capable of detecting small trees in the lower forest layer. So far, this has been practically impossible when tree segmentation techniques based on the CHM were applied to LIDAR data. Compared to the standard watershed segmentation procedure, the combination of the stem detection method and the normalized cut segmentation leads to the best segmentation results and is superior in the best case by 12%. Moreover, the experiments show clearly that the usage of full waveform data is superior to first/last pulse data. * Corresponding author.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

3D Modelling of Individual Trees Using Full-waveform Lidar

For the last few decades, analysis of forest area has been conducted using remote sensing techniques such as aerial photogrammetry, satellite imagery, synthetic aperture radar and lidar. Airborne laser scanning in particular offers a cost-effective, versatile, operationally flexible and robust sampling tool for forest management. There is a growing industry trend towards techniques of ‘precisio...

متن کامل

Automatic Reconstruced Roof Shapes for Lidar Strip Adjustment and Quality Control

In the recent years, the performance of LiDAR systems was improved by acquisition of the terrain surface with steadily increasing point densities. However, the main error sources affecting the quality of LiDAR derived secondary products like DTMs and DSMs are resulting from systematic residual errors coming from insufficient calibration and strip adjustment, and from deficiencies in classificat...

متن کامل

Processing Full-waveform Lidar Data to Extract Forest Parameters and Digital Terrain Model: Validation in an Alpine Coniferous Forest

Small footprint discrete return lidar data have already proved useful for providing information on forest areas. During the last decade, a new generation of airborne laser scanners, called full-waveform (FW) lidar systems, has emerged. They digitize and record the entire backscattered signal of each emitted pulse. Fullwaveform data hold large potentialities. In this study, we investigated the p...

متن کامل

Interest of a Full-Waveform Flown UV Lidar to Derive Forest Vertical Structures and Aboveground Carbon

Amongst all the methodologies readily available to estimate forest canopy and aboveground carbon (AGC), in-situ plot surveys and airborne laser scanning systems appear to be powerful assets. However, they are limited to relatively local scales. In this work, we have developed a full-waveform UV lidar, named ULICE (Ultraviolet LIdar for Canopy Experiment), as an airborne demonstrator for future ...

متن کامل

Enhanced Detection of 3d Individual Trees in Forested Areas Using Airborne Full-waveform Lidar Data by Combining Normalized Cuts with Spatial Density Clustering

A detailed understanding of the spatial distribution of forest understory is important but difficult. LiDAR remote sensing has been developing as a promising additional instrument to the conventional field work towards automated forest inventory. Unfortunately, understory (up to 50% of the top-tree height) in mixed and multilayered forests is often ignored due to a difficult observation scenari...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008