The Vibration and Measurement of Driving Mode of the Two-stage Decoupled Micro-machined Gyroscope
نویسندگان
چکیده
This paper introduces the working principle of the two-stage decoupled micro-machined gyroscope, and establishes the vibration equation of the driving mode. By solving the differential equation, the analytical solution and the amplitude-frequency characteristics of the driving mode are obtained. By the visual measurement based on high-speed photography and the post image processing, it measures the natural frequency of the driving mode of the micro-machined gyroscope. And it measures the damping coefficient in time domain and frequency domain respectively using this method. The comparison to the theoretical solution proves that the method is effective and accurate; it will help the study for the micro-machined gyroscope vibration and provides a new way to measure MEMS.
منابع مشابه
Dynamic Characteristics of Vertically Coupled Structures and the Design of a Decoupled Micro Gyroscope
In a vertical type, vibratory gyroscope, the coupled motion between reference (driving) and sensing vibrations causes the zero-point output, which is the unwanted sensing vibration without angular velocity. This structural coupling leads to an inherent discrepancy between the natural frequencies of the reference and the sensing oscillations, causing curve veering in frequency loci. The coupled ...
متن کاملDynamic modeling and nonlinear vibration simulation of piezoelectric micro-beam in self sensing mode of atomic force microscope
Nowadays, atomic force microscope is considered as a useful tool in the determination of intermolecular forces and surface topography with the resolution of nanometers. In this kind of microscope, micro cantilever is considered as the heart of the microscope and is used as a measuring tool. This paper is aimed towards investigating the behavior of a piezoelectric micro cantilever with a triang...
متن کاملResearch of Processing Errors on Modal Frequency of a Dual-mass Decoupled Silicon Micro-gyroscope
In this paper, the architecture, processing errors analysis and optimization method of a dual-mass silicon micro-gyroscope are presented. The dual-mass silicon micro-gyroscope consists of two identical single mass gyroscopes and a lever mechanism. Driving decoupling springs and sensing decoupling springs are key components to achieve motion decoupling. The processing error analysis indicates th...
متن کاملDesign and Simulation of MEMS Based Gyroscope
This paper represents a MEMS based gyroscope to measure orientation. Silicon-micro-machined gyro is fabricated on the basis of resonators and they use vibrating mechanical element to sense rotation. The vibratory measurement can be done by measuring the change in capacitance with respect to the voltage or force applied in particular axis. Here MEMS based gyroscope has been designed from Lame mo...
متن کاملOptimal characteristics determination of engine mounting system using TRA mode decoupling with emphasis on frequency responses
It is possible to improve vehicle vibration by tuning the parameters of engine mounting system. By optimization of mount characteristics or finding the optimal position of mounts, vibration of the engine and transmitted force from the engine to the chassis can be reduced. This paper examines the optimization of 6-degree-of-freedom engine mounting system based on torque roll axis (TRA) mode deco...
متن کامل