Creep of a fracture line in paper peeling.

نویسندگان

  • J Koivisto
  • J Rosti
  • M J Alava
چکیده

The slow motion of a crack line is studied via an experiment in which sheets of paper are split into two halves in a "peel-in-nip" (PIN) geometry under a constant load, in creep. The velocity-force relation is exponential. The dynamics of the fracture line exhibits intermittency, or avalanches, which are studied using acoustic emission. The energy statistics is a power law, with the exponent beta ~ 1.8 +/- 0.1. Both the waiting times between subsequent events and the displacement of the fracture line imply complicated stick-slip dynamics. We discuss the correspondence to tensile PIN tests and other similar experiments on in-plane fracture and the theory of creep for elastic manifolds.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment

There is an increasing need to assess the service life of components containing defect which operate at high temperature. This paper describes the current fracture mechanics concepts that are employed to predict cracking of engineering materials at high temperatures under static and cyclic loading. The relationship between these concepts and those of high temperature life assessment methods is ...

متن کامل

Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy

In the presented article, the temperature effect was studied on creep properties and fracture behaviors of AlSi12Cu3Ni2MgFe aluminum-silicon alloys, unreinforced and reinforced with SiO2 nano-particles. For such objective, standard specimens were fabricated by gravity casting and stir-casting methods, for aluminum alloys and nano-composites, respectively. Then, force-controlled creep...

متن کامل

Creep behavior and in-depth microstructural characterization of dissimilar joints

The 700 °C power plants currently under development will utilize Ni-base alloys such as alloy 617 for components to be operated at temperatures >650 °C. Due to economic reasons for components or parts of components which are subjected to temperatures <650 °C, 2% Cr or 9-12% Cr steels is used, depending on the required mechanical properties. This makes the dissimilar joining of Ni-base alloys an...

متن کامل

On the development of creep damage constitutive equations: modified hyperbolic sine law for minimum creep strain rate and stress and creep fracture criterion based on cavity area fraction along grain boundary

This paper reports (1) the latest development and application of a modified hyperbolic sine law for minimum creep strain rate and stress for both low Cr and high Cr steels, and (2) the development of a creep fracture criterion based on cavity area fraction along grain boundaries for high Cr steel. This work is part of the fundamental development of creep damage constitutive equations which were...

متن کامل

تأثیر دما، رطوبت و زمان در خزش فشاری بخش تاخورده فرش دستباف

If a carpet is put under pressure during use or storage, its thickness decreases instantly and continues to decrease slowly as the pressure is not removed. Some part of this loss of thickness is not recoverable. This phenomenon is called creep and is influenced by parameters such as temperature and humidity, and it may cause breakage, burst, crease, bump, and folding line in the carpet. By stud...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 99 14  شماره 

صفحات  -

تاریخ انتشار 2007